Opens in a new tab

GD25Q127CYIGR

128Mb (16MB) SPI NOR Flash, Quad I/O, 104MHz, 2.7-3.6V, 8-WDFN (6x8mm)

2102

Effective Inventory

Image for reference only

Manufacturer Part:

GD25Q127CYIGR

Package:

8-WDFN Exposed Pad (6.0 x 8.0 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The GD25Q127CYIGR is a 128Mb (16MB) serial NOR flash memory manufactured by GigaDevice Semiconductor, supporting standard SPI, Dual I/O SPI, and Quad I/O SPI modes with clock frequencies up to 104 MHz. Packaged in an 8-WDFN (6×8 mm) exposed pad package, this 3V uniform sector flash features programmable sector protection, hardware/software write protection, and deep power-down mode for ultra-low standby current.

Key Specifications

Memory Size 128Mb (16MB, 16M x 8)
Memory Type NOR Flash (Non-Volatile)
Interface SPI – Quad I/O
Clock Frequency 104 MHz (Quad I/O mode)
Supply Voltage 2.7V to 3.6V
Write Cycle Time 12 us (word), 2.4 ms (page)
Endurance 100,000 erase/program cycles
Operating Temperature -40°C to +85°C
Package 8-WDFN Exposed Pad (6 x 8 mm)

Features

  • 128Mb density with standard/dual/quad SPI interface for flexible throughput
  • 104 MHz clock in Quad I/O mode enables execute-in-place (XIP) operation
  • Uniform 4KB sector architecture with 64KB block erase support
  • Programmable sector protection and hardware write protection for data security
  • Deep power-down mode for ultra-low standby current consumption

Applications

  • Embedded system firmware storage and OTA update buffering
  • IoT device code storage and configuration data logging
  • Networking equipment boot flash and configuration backup
  • Consumer electronics (set-top boxes, routers, smart appliances)
  • Industrial control system parameter and firmware storage
Product Introduction: GD25Q127CYIGR Product Introduction

The GD25Q127CYIGR from GigaDevice Semiconductor is a 128Mb (16MB) serial NOR flash memory supporting standard SPI, Dual I/O, and Quad I/O modes up to 104 MHz. Organized as 16M x 8 bits with uniform 4KB sectors and 64KB blocks, the device provides flexible erase granularity and 100,000-cycle endurance. The 2.7V to 3.6V supply range makes it compatible with standard 3.3V logic systems. Features include programmable sector protection, top/bottom array protection, one-time programmable (OTP) area, and deep power-down mode. The 8-WDFN exposed pad package provides excellent thermal performance and is command-set compatible with Winbond W25Q128 and similar devices.

Working Principle: GD25Q127CYIGR Working Principle

The GD25Q127CYIGR operates as a standard SPI peripheral with chip select (CS), serial clock (CLK), and data lines (DI, DO, WP, HOLD). In Quad I/O mode, all four data pins serve as bidirectional I/O, enabling 4-bit-per-clock transfer at up to 104 MHz for execute-in-place (XIP) code execution. Read operations access the flash array through the SPI command protocol, while program and erase operations require the write-enable (WREN) command followed by the specific program/erase command. The internal state machine manages timing for page program (2.4 ms typical), sector erase, and block erase operations. The deep power-down command reduces standby current to microamp levels for battery-powered applications.

Pin Description: GD25Q127CYIGR Pin Definition and Functions
Pin Name Type Function
1 CS# Input Chip select (active low)
2 DO(IO1) I/O Data output / Quad I/O bit 1
3 WP#(IO2) I/O Write protect / Quad I/O bit 2
4 VSS Power Ground
5 DI(IO0) I/O Data input / Quad I/O bit 0
6 CLK Input Serial clock
7 HOLD#(IO3) I/O Hold / Quad I/O bit 3
8 VDD Power Supply voltage (2.7-3.6V)
9 EP Power Exposed pad (connect to VSS)
Application Scenarios: In which products and applications is GD25Q127CYIGR used
  • RTOS and Linux-based embedded system firmware storage with XIP boot
  • IoT device over-the-air (OTA) firmware update buffering with dual-bank operation
  • Router and gateway boot configuration and calibration data storage
  • Smart appliance parameter and user preference persistent storage
  • Industrial PLC firmware and configuration backup in harsh environments
Alternative Models: What chips are recommended as replacements for GD25Q127CYIGR
Manufacturer Part Number Package Notes
Winbond W25Q128JVSIQ SOIC-8 128Mb, Quad SPI, 133MHz
Macronix MX25L12833F SOP-8 128Mb, Quad SPI, 120MHz
ISSI IS25LP128 SOIC-8 128Mb, Quad SPI, 133MHz
Cypress S25FL128LAGMFI01 SOIC-8 128Mb, Quad SPI, 108MHz
Microchip SST26VF064B SOIC-8 64Mb, SQI, 104MHz

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1