Opens in a new tab

PESD15VS2UT

Double unidirectional ESD protection diode, 15V VRWM, 160W, >30kV ESD, SOT-23

12324

Effective Inventory

Image for reference only

Manufacturer Part:

PESD15VS2UT

Package:

SOT-23 (2.9 x 1.3 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PESD15VS2UT is a unidirectional double ESD protection diode manufactured by Nexperia, designed to protect up to two transmission or data lines from electrostatic discharge damage in a SOT-23 plastic package. With a reverse standoff voltage of 15V, peak pulse power of 160W, and ultra-low leakage current below 20 nA, the device provides IEC 61000-4-2 contact discharge protection exceeding 30 kV.

Key Specifications

Configuration Double Diode (Common Anode)
Direction Unidirectional
Reverse Standoff Voltage (VRWM) 15V
Breakdown Voltage (VBR) 17.6V to 18.4V
Clamping Voltage (VCL) 40V max @ IPP=5A
Peak Pulse Power (PPPM) 160W @ 8/20 us
Leakage Current (IRM) 0.02 uA typical, 1 uA max
ESD Protection >30 kV (IEC 61000-4-2 contact)
Diode Capacitance 32 pF typical @ 1 MHz
Operating Temperature -65°C to +150°C
Package SOT-23 (2.9 x 1.3 x 1.0 mm)

Features

  • Unidirectional ESD protection of up to two data lines
  • Peak pulse power of 160W for robust surge handling
  • Ultra-low reverse leakage current below 20 nA typical
  • IEC 61000-4-2 Level 4 ESD protection exceeding 30 kV contact discharge
  • Low clamping voltage of 23V at 1A and 40V at 5A

Applications

  • Computer and peripheral data line ESD protection
  • Communication system interface protection
  • Audio and video equipment input protection
  • High-speed data line transient suppression
  • Parallel port and control line ESD clamping
Product Introduction: PESD15VS2UT Product Introduction

The PESD15VS2UT from Nexperia is a unidirectional double ESD protection diode in a SOT-23 package, designed to protect up to two data lines from electrostatic discharge and surge transients. With a reverse standoff voltage of 15V and breakdown voltage of 17.6V to 18.4V, the device clamps transient voltages to 40V maximum at 5A peak pulse current. The ultra-low leakage current of 20 nA typical ensures minimal impact on protected signal integrity. The common-anode configuration enables protection of two independent lines with a single ground reference, and the device meets IEC 61000-4-2 Level 4 with contact discharge protection exceeding 30 kV.

Working Principle: PESD15VS2UT Working Principle

The PESD15VS2UT contains two avalanche diodes in a common-anode configuration within a SOT-23 package. Under normal operating conditions (voltages below 15V), the diodes present very high impedance with leakage current below 20 nA, not affecting signal integrity. When an ESD or surge event drives the line voltage above the breakdown voltage (approximately 18V), the diode avalanches and conducts the transient current to ground, clamping the voltage at the protected node. The low clamping voltage (23V at 1A, 40V at 5A) ensures the protected IC sees a limited voltage stress. The 8/20 us peak pulse power rating of 160W allows the device to handle IEC 61000-4-5 surge events up to 5A.

Pin Description: PESD15VS2UT Pin Definition and Functions
Pin Name Type Function
1 K1 I/O Cathode of diode 1; connect to protected line 1
2 K2 I/O Cathode of diode 2; connect to protected line 2
3 A Ground Common anode; connect to system ground
Application Scenarios: In which products and applications is PESD15VS2UT used
  • RS-232 and RS-485 communication line ESD protection in industrial systems
  • USB 1.1/2.0 D+ and D- data line transient suppression
  • Audio codec input/output line ESD clamping in consumer electronics
  • Parallel port and GPIO line protection in computer peripherals
  • Keypad and button interface ESD protection in embedded systems
Alternative Models: What chips are recommended as replacements for PESD15VS2UT
Manufacturer Part Number Package Notes
Nexperia PESD5V2S2UT SOT-23 5.2V VRWM, double ESD
Nexperia PESD12VS2UT SOT-23 12V VRWM, double ESD
onsemi NUP4202MR6 SOT-23-6 Quad ESD, 5V VRWM
TI TPD4E05U06 USON-10 4-channel ESD, 5V, ultra-low cap
ST ESDAMLIN8 QFN 8-channel ESD protection array

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1