Opens in a new tab

742792514

600R @ 100MHz SMD ferrite bead, 1812, high current

4183

Effective Inventory

Image for reference only

Manufacturer Part:

742792514

Package:

1812 (4532 Metric)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 742792514 from Wurth Elektronik is a 600 Ohm @ 100MHz SMD ferrite bead in a 1812 (4532 Metric) package. multilayer ferrite bead for EMI suppression.

Key Specifications

Component Type SMD Ferrite Bead / EMI Suppression Filter
Impedance 600 Ohm @ 100MHz
Tolerance –
Dielectric/Type NiZn Ferrite
Package 1812 (4532 Metric)

Features

  • 600 Ohm impedance at 100MHz for EMI suppression
  • 1812 package for high-current applications up to 6A
  • Multilayer construction for low DC resistance
  • NiZn ferrite material for >100MHz suppression
  • Magnetically shielded design

Applications

  • Power supply line EMI filtering
  • DC-DC converter output noise suppression
  • USB and HDMI cable EMI filtering
  • Industrial equipment power line noise filtering
  • Automotive ECU power rail decoupling
Product Introduction: 742792514 Product Introduction

The 742792514 from Wurth Elektronik is a 600 Ohm @ 100MHz SMD ferrite bead in a 1812 (4532 Metric) package. multilayer ferrite bead for EMI suppression.

Working Principle: 742792514 Working Principle

The 742792514 uses a multilayer ferrite construction with NiZn (Nickel-Zinc) ceramic material. At low frequencies and DC, the device presents low resistance (primarily the DC resistance of the internal conductor), allowing signal and power currents to flow with minimal voltage drop. At high frequencies (above approximately 10MHz), the ferrite material exhibits high impedance due to the frequency-dependent increase in both inductive reactance and resistive losses. This high-frequency impedance converts EMI noise energy into heat, effectively suppressing conducted emissions on power and signal lines without requiring a ground connection for the filtering function.

Pin Description: 742792514 Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Passive Signal/power input; connect in series with filtered line
2 Terminal 2 Passive Signal/power output
Application Scenarios: In which products and applications is 742792514 used
  • Power supply line EMI filtering
  • DC-DC converter output noise suppression
  • USB and HDMI cable EMI filtering
  • Industrial equipment power line noise filtering
  • Automotive ECU power rail decoupling
Alternative Models: What chips are recommended as replacements for 742792514
Manufacturer Part Number Package Notes
BLM31PG601SN1L Murata 1812 600R 100MHz ferrite
GZ2012D601TF TDK 0805 600R ferrite
BLM31A601SN1L Murata 1812 600R
MPZ2012S601AT000 TDK 0805 600R ferrite

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1