Opens in a new tab

Home » Integrated Circuits ICs » SN74HC07DR

SN74HC07DR

Hex buffer/driver with open-drain output, 2-6V, SOIC-14

4685

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HC07DR

Package:

SOIC-14 (8.65×3.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74HC07DR from TI is a hex buffer/driver with open-drain outputs in the 74HC CMOS family, operating from 2-6V. Each buffer can drive loads up to the supply voltage with open-drain output for wired-OR and level-shifting applications.

Key Specifications

Logic Type Hex buffer/driver
Family 74HC (High-Speed CMOS)
Gates 6
Output Type Open-drain
Supply Voltage 2-6V
Output Current +/-5.2mA @ 6V
Propagation Delay 11ns typ @ 6V
Temp -40 to 85C / 125C

Features

  • Six non-inverting buffers with open-drain outputs
  • Wide 2-6V supply voltage range
  • Open-drain for wired-OR and level shifting
  • 5.2mA output drive at 6V
  • 11ns typical propagation delay at 6V
  • Balanced output sink/source capability
  • Multiple package options

Applications

  • I2C and SMBus level shifting
  • Wired-OR bus connections
  • LED indicator drivers
  • High-voltage interface via pull-up
  • Multi-voltage logic translation
  • Industrial control signal buffering
Product Introduction: SN74HC07DR Product Introduction

The SN74HC07DR from TI is a hex buffer with open-drain outputs in the 74HC CMOS family. Operating from 2-6V, the open-drain outputs enable level shifting and wired-OR connections. The SOIC-14 (DR suffix) package supports 2.5kpcs tape and reel.

Working Principle: SN74HC07DR Working Principle

Each buffer is a non-inverting driver with open-drain output. When the input is high, the output NMOS transistor conducts, pulling the output low. When the input is low, the output is high-impedance, allowing an external pull-up resistor to pull it to any voltage up to 6V. This enables wired-OR connections and voltage translation between different logic levels.

Pin Description: SN74HC07DR Pin Definition and Functions
Pin Name Function
1 1A Buffer 1 input
2 1Y Buffer 1 output (open-drain)
3 2A Buffer 2 input
4 2Y Buffer 2 output
5 3A Buffer 3 input
6 3Y Buffer 3 output
7 GND Ground
8 4Y Buffer 4 output
9 4A Buffer 4 input
10 5Y Buffer 5 output
11 5A Buffer 5 input
12 6Y Buffer 6 output
13 6A Buffer 6 input
14 VCC Power supply
Application Scenarios: In which products and applications is SN74HC07DR used
  • I2C/SMBus level shifting
  • Wired-OR bus connections
  • LED driver interface
  • Logic voltage translation
Alternative Models: What chips are recommended as replacements for SN74HC07DR
Manufacturer Part Number Notes
TI SN74LS07 Bipolar TTL version
Nexperia 74HC07 Pin-compatible
ON Semi MC74HC07 Pin-compatible
TI SN74AHC07 Advanced HC version

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL41050TA-3E

NVE IL41050TA-3E IsoLoop isolated CAN transceiver, 2.5kVrms isolation, 1Mbps, 16-SOIC

Brand: nve

Package: SOIC-16 NB

IN STOCK: 3150pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4115TRLPBF

IRFS4115TRLPBF – 150V N-Channel HEXFET Power MOSFET, 12.1 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 6965pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MX29LV800CBTI-70G

8Mbit Parallel NOR Flash, Bottom Boot, 70ns, 2.7-3.6V, 48-TSOP

Brand: Macronix

Package: 48-TSOP

IN STOCK: 9345pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMC7101AIM5X/NOPB

Single CMOS RRIO op-amp, 1.4MHz, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 11389pcs

Cargo cycle: 3-7 Days

The minimum order is 1