Opens in a new tab

Home » Integrated Circuits ICs » W25Q80VSSI

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

4316

Effective Inventory

Image for reference only

Manufacturer Part:

W25Q80VSSI

Package:

SOIC-8 208mil (5.3×8.0mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The W25Q80VSSI from Winbond is an 8Mbit (1MB) Serial NOR Flash memory supporting standard, dual, and quad SPI interfaces at up to 104MHz in SOIC-8 package.

Key Specifications

Density 8Mbit (1MB)
Interface Standard/Dual/Quad SPI
Max Clock 104 MHz
Quad I/O Equivalent 416 MHz (52MB/s)
Supply Voltage 2.7-3.6V
Sector Size 4KB
Block Size 32KB/64KB
Erase Cycles 100,000 min
Data Retention 20 years
Temp -40 to 85C

Features

  • 8Mbit with flexible 4KB/32KB/64KB erase
  • Standard, dual, and quad SPI support
  • 104MHz standard SPI clock
  • Quad I/O equivalent 416MHz throughput
  • XIP (Execute-In-Place) support
  • 64-bit unique ID and security registers
  • Write protection with top/bottom/array control
  • Suspend/Resume for erase and program
  • Hold pin for pausing serial communication

Applications

  • Embedded firmware storage
  • Boot code and configuration data
  • IoT device program memory
  • Audio and graphics data storage
  • Consumer electronics firmware
Product Introduction: W25Q80VSSI Product Introduction

The W25Q80VSSI from Winbond is an 8Mbit Serial NOR Flash supporting standard, dual, and quad SPI at up to 104MHz. With flexible 4KB sector erase, XIP support, and 100K erase cycle endurance, it is widely used for firmware and data storage in embedded systems.

Working Principle: W25Q80VSSI Working Principle

The W25Q80VSSI is organized as 4096 programmable pages of 256 bytes each. Erase operations apply to 4KB sectors, 32KB/64KB blocks, or the entire chip. Quad SPI mode uses 4 data lines for command, address, and data, achieving equivalent 416MHz throughput. XIP mode allows direct code execution without RAM loading. Program suspend/resume enables interrupting long erase cycles for urgent read operations.

Pin Description: W25Q80VSSI Pin Definition and Functions
Pin Name Function
1 /CS Chip Select
2 DO (IO1) Data Output / IO1
3 /WP (IO2) Write Protect / IO2
4 GND Ground
5 DI (IO0) Data Input / IO0
6 CLK Serial Clock
7 /HOLD (IO3) Hold / IO3
8 VCC 2.7-3.6V supply
Application Scenarios: In which products and applications is W25Q80VSSI used
  • Embedded firmware storage
  • Boot code and OTA updates
  • IoT program memory
  • Graphics and audio data
Alternative Models: What chips are recommended as replacements for W25Q80VSSI
Manufacturer Part Number Notes
Macronix MX25V8035FM2I 8Mbit Quad SPI
GigaDevice GD25Q80C 8Mbit pin-compatible
Winbond W25Q16VSSI 16Mbit upgrade
ISSI IS25LP080 8Mbit Quad SPI

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1