Opens in a new tab

0603USB-222MLC

0603 EMI filter for USB 2.0, 2-line, 2200pF, 5V, CMC+ESD integrated

7234

Effective Inventory

Image for reference only

Manufacturer Part:

0603USB-222MLC

Package:

0603 (1.6×0.8mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 0603USB-222MLC from Laird is a 0603-size integrated EMI filter combining common-mode chokes with ESD protection capacitors, designed specifically for USB 2.0 high-speed differential signal lines.

Key Specifications

Type Integrated EMI filter (CMC + ESD)
Lines 2 (differential)
Capacitance 2200pF
Common Mode Impedance 90Ω @ 100MHz
Voltage Rating 5VDC
Current Rating 100mA
USB Speed High-Speed (480Mbps)
Package 0603
Operating Temp -40°C ~ +85°C

Features

  • Integrated common-mode choke + ESD capacitor in 0603
  • Designed for USB 2.0 high-speed (480Mbps) signals
  • 2200pF line-to-ground capacitance for ESD suppression
  • 90Ω common-mode impedance at 100MHz
  • Minimal signal degradation on differential pairs
  • Compact 0603 footprint saves PCB area

Applications

  • USB 2.0 port EMI filtering and ESD protection
  • Mobile device USB interfaces
  • Laptop and tablet USB ports
  • Embedded USB host/device ports
Product Introduction: 0603USB-222MLC Product Introduction

The 0603USB-222MLC from Laird is an integrated EMI filter in 0603 package combining a common-mode choke and 2200pF ESD capacitors. Designed for USB 2.0 high-speed differential pairs, it provides both EMI suppression and ESD protection in a single component.

Working Principle: 0603USB-222MLC Working Principle

The device integrates a common-mode choke (CMC) that presents high impedance to common-mode noise while passing differential signals with minimal attenuation. The 2200pF capacitors from each line to ground divert ESD transients away from the protected IC. The 0603 footprint allows placement directly at the USB connector for maximum effectiveness.

Pin Description: 0603USB-222MLC Pin Definition and Functions
Pin Name Function
1 D+ in USB D+ signal input
2 GND Ground (ESD path)
3 D- in USB D- signal input
4 D+ out USB D+ signal output
5 GND Ground (ESD path)
6 D- out USB D- signal output
Application Scenarios: In which products and applications is 0603USB-222MLC used
  • USB 2.0 port EMI/ESD protection
  • Mobile device USB interfaces
  • Laptop USB port filtering
  • Embedded USB host ports
Alternative Models: What chips are recommended as replacements for 0603USB-222MLC
Part Number Manufacturer Notes
MMZ1608M220C TDK 0603 CMC alternative
DLP31SN221SL2 Murata Common mode + ESD filter
744233100 Wurth USB common mode choke

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1