Opens in a new tab

Home » Integrated Circuits ICs » SN74AUP1G07DCKR

SN74AUP1G07DCKR

Single open-drain buffer, 0.8-3.6V, 0.9uA Icc, SOT-353, -40 to 85C

12175

Effective Inventory

Image for reference only

Manufacturer Part:

SN74AUP1G07DCKR

Package:

SOT-353 (SC-70-5, 2.0×1.25×0.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Texas Instruments SN74AUP1G07DCKR is a single open-drain buffer/line driver in the ultra-low-power AUP family. 0.8V to 3.6V supply, 0.9uA Icc, 5-pin SOT-353 (SC-70) package for low-voltage signal buffering.

Key Specifications

Function Single Buffer/Line Driver (Open-Drain)
Supply Voltage 0.8V to 3.6V
Propagation Delay 9.5ns typ @ 3.3V
Supply Current 0.9 uA max
Output Drive 5.5 mA @ 3.3V
Input Voltage Tolerance 5.5V
Operating Temperature -40 to +85C
Package SOT-353 (SC-70-5, 2.0×1.25mm)

Features

  • Ultra-low 0.9uA supply current
  • 0.8V minimum supply voltage
  • Open-drain output for level translation
  • 5.5V tolerant input
  • Sub-10ns propagation delay

Applications

  • Open-drain I2C/SMBus buffer
  • Level translation pull-up
  • Low-voltage signal gating
  • Wired-OR logic bus
Product Introduction: SN74AUP1G07DCKR Product Introduction

The SN74AUP1G07DCKR from Texas Instruments is a single open-drain buffer/line driver in the ultra-low-power AUP family, packaged in a tiny SOT-353 (SC-70-5) surface-mount package. With 0.8V minimum supply voltage and 0.9uA maximum supply current, it is designed for sub-1V and battery-powered applications. The open-drain output with 5.5V input tolerance enables voltage level translation and wired-OR bus connections such as I2C and SMBus.

Working Principle: SN74AUP1G07DCKR Working Principle

The SN74AUP1G07 uses CMOS logic with an ultra-low-power process for sub-microwatt operation. The open-drain output consists of a single NMOS pulldown transistor. When the input is high, the NMOS is on, pulling the output low. When the input is low, the NMOS is off and the output floats high via an external pull-up resistor to any voltage up to 5.5V, enabling level translation. The AUP architecture minimizes static power to 0.9uA.

Pin Description: SN74AUP1G07DCKR Pin Definition and Functions
Pin Name Type Description
1 A Input Data input (5.5V tolerant)
2 GND Power Ground
3 Y Output Open-drain output
4 NC – No connect
5 VCC Power Supply (0.8-3.6V)
Application Scenarios: In which products and applications is SN74AUP1G07DCKR used
  • I2C/SMBus open-drain bus buffer
  • 1.2V to 3.3V level translation
  • Wired-OR interrupt line
  • Battery-powered signal gating
Alternative Models: What chips are recommended as replacements for SN74AUP1G07DCKR
Model Manufacturer Key Difference
SN74LVC1G07 TI LVC family, 1.65-5.5V
NC7SVU04 onsemi Unbuffered inverter, similar size

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1