Opens in a new tab

CAT5113ZI-10-T3

10-tap digital pot, 100kOhm, I2C, non-volatile, 8-SOIC, -40 to 85C

3555

Effective Inventory

Image for reference only

Manufacturer Part:

CAT5113ZI-10-T3

Package:

8-Pin SOIC (5.0×4.0x1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The onsemi CAT5113ZI-10-T3 is a 10-tap digitally programmable potentiometer (DPP) with I2C interface. 100kOhm end-to-end resistance, 2.5V to 6V supply, non-volatile wiper storage in an 8-pin SOIC package.

Key Specifications

Function 10-Tap Digital Potentiometer
Interface I2C
Resistance 100 kOhm end-to-end
Number of Taps 10
Wiper Setting Non-volatile (EEPROM)
Supply Voltage 2.5V to 6.0V
Supply Current 1 mA typ
I2C Address 0101000 (A0 pin selectable)
Endurance 1M rewrite cycles
Data Retention 100 years
Operating Temperature -40 to +85C
Package 8-Pin SOIC (5.0×4.0mm)

Features

  • 10-tap resolution with non-volatile storage
  • I2C serial interface
  • 100kOhm end-to-end resistance
  • Auto-recall of wiper position on power-up
  • 2.5V to 6V wide supply range
  • 1M cycle EEPROM endurance

Applications

  • LCD contrast adjustment
  • Op-amp gain programming
  • Sensor offset calibration
  • Volume control
Product Introduction: CAT5113ZI-10-T3 Product Introduction

The CAT5113ZI-10-T3 from onsemi is a 10-tap digitally programmable potentiometer (DPP) with I2C interface in an 8-pin SOIC package. The 100kOhm resistor ladder has 10 taps selectable through an I2C command. The wiper position is stored in non-volatile EEPROM and automatically recalled on power-up, eliminating the need for processor re-initialization. With 2.5V to 6V supply range and 1M cycle EEPROM endurance, it is suitable for set-and-forget calibration applications.

Working Principle: CAT5113ZI-10-T3 Working Principle

The CAT5113 consists of a 100kOhm resistor ladder with 10 equally-spaced taps and a CMOS multiplexer that connects the wiper (RW) to the selected tap. An I2C slave interface (address 0101000) receives commands to increment, decrement, or directly set the wiper position. The current wiper setting is stored in non-volatile EEPROM. On power-up, the auto-recall feature loads the last stored wiper position from EEPROM to the multiplexer, restoring the previous setting without processor intervention.

Pin Description: CAT5113ZI-10-T3 Pin Definition and Functions
Pin Name Type Description
1 RH Analog Resistor high terminal
2 RW Analog Wiper terminal
3 RL Analog Resistor low terminal
4 VSS Power Ground
5 A0 Input I2C address select
6 SDA I/O I2C data
7 SCL Input I2C clock
8 VDD Power Supply (2.5-6V)
Application Scenarios: In which products and applications is CAT5113ZI-10-T3 used
  • LCD panel contrast adjustment
  • Op-amp offset and gain trim
  • Sensor bridge offset calibration
  • Audio volume control via I2C
Alternative Models: What chips are recommended as replacements for CAT5113ZI-10-T3
Model Manufacturer Key Difference
AD5171 ADI 64-tap, I2C, higher resolution
MCP4017 Microchip 128-tap, I2C, smaller package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1