Opens in a new tab

RP110Q282D-TR-FE

2.8V 150mA CMOS LDO, 1uA Iq, SC-88A, -40 to 85C

12897

Effective Inventory

Image for reference only

Manufacturer Part:

RP110Q282D-TR-FE

Package:

SC-88A (SOT-353, 2.1×1.3×0.9mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Nisshinbo Micro Devices RP110Q282D-TR-FE is a CMOS LDO linear regulator with fixed 2.8V output, 150mA max current, ultra-low 1uA supply current in SC-88A (SOT-353) package.

Key Specifications

Output Voltage 2.8V (fixed)
Output Accuracy +/-1% @ 25C
Max Output Current 150mA
Dropout Voltage 0.28V typ @ 150mA
Supply Current 1 uA typ
Standby Current 0.1 uA typ
Input Voltage 1.4V to 5.25V
Operating Temp -40 to +85C
Package SC-88A (SOT-353, 5-pin)

Features

  • Ultra-low 1uA supply current
  • Fixed 2.8V output, +/-1% accuracy
  • Soft-start inrush current limit
  • CE enable pin for power gating
  • Overcurrent and short circuit protection
  • Uses 0.1uF ceramic output capacitor

Applications

  • Smartphone and tablet power rail
  • Wearable device low-power LDO
  • IoT sensor node supply
  • Portable medical instrument
Product Introduction: RP110Q282D-TR-FE Product Introduction

The RP110Q282D-TR-FE from Nisshinbo Micro Devices is a CMOS-based LDO regulator with fixed 2.8V output and 150mA max current in SC-88A (SOT-353) package. Ultra-low 1uA supply current makes it ideal for battery-powered applications with sleep mode. Dropout voltage is 0.28V typ at 150mA. CE enable pin allows power gating with 0.1uA standby. Overcurrent and short circuit protection included.

Working Principle: RP110Q282D-TR-FE Working Principle

The RP110 uses a CMOS pass transistor (PMOS) between VIN and VOUT. An error amplifier compares a scaled version of VOUT with an internal bandgap reference, driving the PMOS gate to regulate VOUT at 2.8V. The CMOS process enables 1uA quiescent current vs. 50-100uA for bipolar LDOs. Soft-start circuit gradually ramps the output to limit inrush current. The CE pin disables the pass transistor for 0.1uA standby.

Pin Description: RP110Q282D-TR-FE Pin Definition and Functions
Pin Name Type Description
1 VOUT Output Regulated 2.8V output
2 GND Power Ground
3 CE Input Chip enable (active high)
4 NC – No connect
5 VIN Input Supply input (1.4-5.25V)
Application Scenarios: In which products and applications is RP110Q282D-TR-FE used
  • Smartphone Wi-Fi/BT module 2.8V rail
  • Wearable sensor 2.8V supply
  • IoT MCU low-power domain
Alternative Models: What chips are recommended as replacements for RP110Q282D-TR-FE
Model Manufacturer Key Difference
XC6206P282MR-G Torex 2.8V LDO, SOT-25
ME6211C28M5G-N Microne 2.8V 500mA LDO

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1