Opens in a new tab

74717

7-pos wire-to-board jumper, 1.27mm pitch, 1.6A, 200V, -40 to 125C

4834

Effective Inventory

Image for reference only

Manufacturer Part:

74717

Package:

Through-Hole (50.8mm length)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TE Connectivity 74717 is a wire-to-board jumper/shunt connector with 7 positions, 1.27mm centerline, 50.8mm length, designed for power and signal PCB connections.

Key Specifications

Connector Type Wire-to-Board Jumper
Number of Positions 7
Centerline 1.27mm (0.05in)
Product Length 50.8mm (2in)
Current Rating 1.6A per contact
Operating Voltage 200VAC
Impedance 97 ohm
Wire Size 28 AWG
Operating Temp -40 to +125C
Insulation Material Nylon (PA46)

Features

  • 7-position single-row configuration
  • 1.27mm fine centerline pitch
  • 1.6A current per contact
  • Power and signal circuit capability
  • -40 to 125C wide temperature range
  • RoHS compliant

Applications

  • PCB-to-PCB power/signal jumper
  • Industrial control board interconnect
  • Telecom backplane signal routing
  • Automotive ECU board-to-board link
Product Introduction: 74717 Product Introduction

The 74717 from TE Connectivity is a 7-position wire-to-board jumper connector with 1.27mm centerline pitch. Rated at 1.6A per contact and 200VAC, it serves both power and signal routing between PCBs. The 50.8mm length and 28 AWG wire gauge suit compact industrial and automotive applications. Nylon PA46 insulation provides -40 to 125C temperature capability.

Working Principle: 74717 Working Principle

The connector uses IDC (insulation displacement contact) or solder termination to connect 28 AWG wires to the board. The 1.27mm pitch enables high-density routing in a compact footprint. Each contact is rated for 1.6A, allowing power distribution alongside signal connections in the same connector body. The nylon insulation provides mechanical stability and electrical isolation across the temperature range.

Pin Description: 74717 Pin Definition and Functions
Contact Type Description
1-7 Signal/Power 7-position contacts
Application Scenarios: In which products and applications is 74717 used
  • Industrial control board interconnect
  • Telecom signal routing
  • Automotive ECU board link
Alternative Models: What chips are recommended as replacements for 74717
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1