Opens in a new tab

Home » Integrated Circuits ICs » 74HCT4052PW-Q100,1

74HCT4052PW-Q100,1

Dual 4:1 MUX, HCT, AEC-Q100, TSSOP-16, -40 to 125C

14337

Effective Inventory

Image for reference only

Manufacturer Part:

74HCT4052PW-Q100,1

Package:

TSSOP-16 (4.4×5.0x1.0mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NXP 74HCT4052PW-Q100,1 is an AEC-Q100 automotive-qualified dual 4-channel multiplexer/demultiplexer. 2x (4:1) configuration with enable, HCT TTL-level inputs in TSSOP-16 package.

Key Specifications

Function Dual 4:1 MUX/DEMUX
Channels 2 x 4:1
Supply Voltage 4.5V to 5.5V (HCT)
On Resistance ~80 ohm typ @ 5V
Bandwidth ~100MHz typ
Enable Active-low common enable
Qualification AEC-Q100
Operating Temp -40 to +125C
Package TSSOP-16 (4.4×5.0mm)

Features

  • AEC-Q100 automotive qualified
  • Dual 4:1 multiplexer/demultiplexer
  • Low ~80 ohm on-resistance
  • HCT TTL-compatible select inputs
  • Common enable with active-low
  • Bidirectional switch paths

Applications

  • Automotive signal routing
  • Sensor channel selection
  • Audio source multiplexing
  • Test equipment channel switching
Product Introduction: 74HCT4052PW-Q100,1 Product Introduction

The 74HCT4052PW-Q100,1 from NXP is an AEC-Q100 automotive-qualified dual 4-channel analog multiplexer/demultiplexer. Two independent 4:1 switches share common select (S0,S1) and enable (E) inputs. HCT version provides TTL-compatible 4.5-5.5V operation. Low ~80 ohm on-resistance and bidirectional switches suit analog signal routing in automotive and industrial applications.

Working Principle: 74HCT4052PW-Q100,1 Working Principle

The 4052 uses transmission gate switches (parallel NMOS+PMOS) for each channel. The 2-bit select code (S0,S1) routes one of four inputs to the common output for each multiplexer section. The active-low enable (E) opens all switches when high. Transmission gates pass analog signals bidirectionally with low and relatively flat on-resistance across the signal range.

Pin Description: 74HCT4052PW-Q100,1 Pin Definition and Functions
Pin Name Description
1 1Y Section 1 common I/O
2-4 1Y0-1Y2 Section 1 inputs
5 2Y3 Section 2 input 3
6 E Enable (active low)
7 VEE Ground/analog supply
8 GND Ground
9-10 S0-S1 Address select
11-15 2Y0-2Y/2Y Section 2 I/O
16 VCC 5V supply
Application Scenarios: In which products and applications is 74HCT4052PW-Q100,1 used
  • Automotive sensor channel select
  • Audio source routing
  • Test multiplexer
Alternative Models: What chips are recommended as replacements for 74HCT4052PW-Q100,1
Model Manufacturer Key Difference
74HC4052PW-Q100 NXP HC version (2-6V)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1