Opens in a new tab

Home » Integrated Circuits ICs » INA4180A1QPWRQ1

INA4180A1QPWRQ1

Quad current sense amp, 0-16V CM, 20V/V, AEC-Q100, TSSOP-20, -40 to 125C

8663

Effective Inventory

Image for reference only

Manufacturer Part:

INA4180A1QPWRQ1

Package:

TSSOP-20 (6.5×4.4×1.0mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Texas Instruments INA4180A1QPWRQ1 is an AEC-Q100 automotive-grade current sense amplifier with 16V common-mode range, 200V/uS slew rate in TSSOP-20 package.

Key Specifications

Type Current Sense Amplifier
Common-Mode Range 0V to 16V
Gain A1 = 20 V/V
Bandwidth 500 kHz
Slew Rate 200 V/us
Offset Voltage +/-500 uV max
Supply Voltage 2.7V to 5.5V
Qualification AEC-Q100 Grade 1
Operating Temp -40 to +125C
Package TSSOP-20 (6.5×4.4mm)

Features

  • AEC-Q100 Grade 1 automotive qualified
  • 16V wide common-mode range
  • 200 V/us high slew rate
  • Low 500uV max offset voltage
  • Single-supply 2.7-5.5V operation
  • Four channels in one package

Applications

  • Automotive battery current monitoring
  • Motor drive phase current sensing
  • Power supply load current measurement
  • Fuel cell and HEV current monitoring
Product Introduction: INA4180A1QPWRQ1 Product Introduction

The INA4180A1QPWRQ1 from TI is an AEC-Q100 Grade 1 automotive current sense amplifier with four channels in a TSSOP-20 package. The 0-16V common-mode range allows high-side current sensing in 12V automotive systems. 20 V/V gain with 500kHz bandwidth and 200 V/us slew rate suit dynamic load monitoring. Low 500uV max offset ensures accurate current measurement across the -40 to 125C automotive temperature range.

Working Principle: INA4180A1QPWRQ1 Working Principle

Each channel measures the voltage across an external sense resistor (Rsense) in the power path. The amplifier outputs Vout = Gain x Vsense = 20 x (Iload x Rsense). The 0-16V common-mode range is achieved with a precision resistor divider network that level-shifts the high-side voltage to the amplifier input range. The 200 V/us slew rate tracks fast transients during load steps and fault conditions.

Pin Description: INA4180A1QPWRQ1 Pin Definition and Functions
Pin Group Name Description
IN+, IN- Sense Inputs (x4) Differential sense voltage
OUT Output (x4) Amplified output voltage
V+, GND Power 2.7-5.5V supply
Application Scenarios: In which products and applications is INA4180A1QPWRQ1 used
  • Automotive battery current monitor
  • Motor phase current sensing
  • Power supply load measurement
Alternative Models: What chips are recommended as replacements for INA4180A1QPWRQ1
Model Manufacturer Key Difference
INA4181A1QPWRQ1 TI 50 V/V gain variant

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1