Opens in a new tab

NCV8170BXV330T2G

3.3V 300mA LDO, AEC-Q100, 3.5uA Iq, XDFN4 1x1mm, -40 to 125C

4022

Effective Inventory

Image for reference only

Manufacturer Part:

NCV8170BXV330T2G

Package:

XDFN-4 (1.0×1.0x0.55mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The onsemi NCV8170BXV330T2G is an AEC-Q100 automotive LDO regulator. 3.3V fixed output, 300mA, ultra-low noise, 5.5V max input in XDFN-4 (1.0×1.0mm) package.

Key Specifications

Output Voltage 3.3V (fixed)
Max Output Current 300mA
Input Voltage 1.8V to 5.5V
Dropout Voltage 180 mV typ @ 300mA
Quiescent Current 3.5 uA typ
PSRR 68 dB @ 1kHz
Qualification AEC-Q100 Grade 1
Operating Temp -40 to +125C
Package XDFN-4 (1.0×1.0x0.55mm)

Features

  • AEC-Q100 Grade 1 automotive
  • Ultra-compact 1.0×1.0mm XDFN-4
  • 3.3V fixed output, +/-1.5% accuracy
  • 3.5uA ultra-low quiescent current
  • 68 dB high PSRR at 1kHz
  • Auto-discharge on disable

Applications

  • Automotive ADAS sensor supply
  • Camera module 3.3V rail
  • RF transceiver clean power
  • IoT MCU low-power domain
Product Introduction: NCV8170BXV330T2G Product Introduction

The NCV8170BXV330T2G from onsemi is an AEC-Q100 Grade 1 automotive LDO with 3.3V fixed output in an ultra-compact 1.0×1.0mm XDFN-4 package. 300mA output with 180mV dropout at full load. Ultra-low 3.5uA quiescent current and 68 dB PSRR at 1kHz provide clean power for noise-sensitive ADAS sensors and RF modules. Auto-discharge feature ensures rapid output discharge when disabled.

Working Principle: NCV8170BXV330T2G Working Principle

CMOS PMOS pass transistor regulated by error amplifier comparing scaled VOUT with bandgap reference. The 3.5uA quiescent current is achieved by optimized internal bias circuit. The 1.0×1.0mm XDFN-4 is among the smallest LDO packages available, enabled by the 4-pin configuration (VIN, VOUT, GND, EN). Auto-discharge uses an internal NMOS to discharge the output capacitor when EN is low.

Pin Description: NCV8170BXV330T2G Pin Definition and Functions
Pin Name Description
1 VOUT 3.3V output
2 GND Ground
3 EN Enable
4 VIN Input (1.8-5.5V)
Application Scenarios: In which products and applications is NCV8170BXV330T2G used
  • ADAS sensor 3.3V supply
  • Camera module power
  • RF transceiver LDO
Alternative Models: What chips are recommended as replacements for NCV8170BXV330T2G
Model Manufacturer Key Difference
NCV8170BXV180T2G onsemi 1.8V output variant

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1