Opens in a new tab

TPS79933DDCR

3.3V 200mA LDO, 70dB PSRR, 28uV noise, SOT-23-5, -40 to 125C

3704

Effective Inventory

Image for reference only

Manufacturer Part:

TPS79933DDCR

Package:

SOT-23-5 (2.9×1.6×1.0mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Texas Instruments TPS79933DDCR is a low-noise, high-PSRR LDO regulator. 3.3V fixed output, 200mA, 70dB PSRR at 1kHz, ultra-low noise in SOT-23-5 package.

Key Specifications

Output Voltage 3.3V (fixed)
Max Output Current 200mA
Input Voltage 2.7V to 5.5V
Dropout Voltage 75 mV typ @ 200mA
PSRR 70 dB @ 1kHz
Noise 28 uVrms (10Hz-100kHz)
Quiescent Current 50 uA typ
Operating Temp -40 to +125C
Package SOT-23-5 (2.9×1.6mm)

Features

  • 70 dB high PSRR at 1kHz
  • 28 uVrms ultra-low output noise
  • 75 mV low dropout at 200mA
  • 50uA low quiescent current
  • 3.3V fixed output
  • EN pin with auto-discharge

Applications

  • RF transceiver clean power
  • ADC/DAC reference supply
  • Audio codec low-noise rail
  • Sensor precision supply
Product Introduction: TPS79933DDCR Product Introduction

The TPS79933DDCR from TI is a low-noise, high-PSRR LDO with 3.3V fixed output in SOT-23-5. 70 dB PSRR at 1kHz and 28 uVrms output noise (10Hz-100kHz) make it ideal for noise-sensitive RF, analog, and audio applications. 75 mV dropout at 200mA and 50uA quiescent current provide efficient operation from 2.7-5.5V input. Enable pin with auto-discharge ensures rapid power-down.

Working Principle: TPS79933DDCR Working Principle

The TPS799 uses a PMOS pass transistor with a low-noise error amplifier and optimized reference circuit. The clean bandgap reference feeds an RC-filtered node that reduces reference noise before the error amplifier. The fast error amplifier loop achieves 70 dB PSRR by actively rejecting input supply ripple. The 75 mV dropout results from the low RDS(on) of the PMOS pass element at 200mA load.

Pin Description: TPS79933DDCR Pin Definition and Functions
Pin Name Description
1 EN Enable (active high)
2 GND Ground
3 IN Input (2.7-5.5V)
4 NC No connect
5 OUT 3.3V output
Application Scenarios: In which products and applications is TPS79933DDCR used
  • RF transceiver supply
  • ADC/DAC reference
  • Audio codec power
Alternative Models: What chips are recommended as replacements for TPS79933DDCR
Model Manufacturer Key Difference
TPS79928DDCR TI 2.8V output variant

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1