Opens in a new tab

LTC6820HMS#TRPBF

isoSPI bridge, bidirectional, MSOP-16, -40 to 125C

13183

Effective Inventory

Image for reference only

Manufacturer Part:

LTC6820HMS#TRPBF

Package:

MSOP-16 (3.0×5.0x1.0mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Analog Devices LTC6820HMS is an isoSPI to SPI bridge/isolator. Provides bidirectional isolated SPI communication for battery management daisy-chains in MSOP-16.

Key Specifications

Interface SPI to isoSPI (bidirectional)
Isolation Transformer-based galvanic
Data Rate Up to 1 MHz
Supply Voltage 2.7V to 5.5V
Current (active) ~10 mA typ
Current (idle) ~300 uA
Operating Temp -40 to +125C
Package MSOP-16 (3.0×5.0mm)

Features

  • Bidirectional SPI-to-isoSPI bridge
  • Galvanic isolation between domains
  • Up to 1 MHz data rate
  • 2.7V-5.5V supply range
  • 300uA idle current
  • Compatible with LTC681x family

Applications

  • Battery BMS daisy-chain head
  • EV battery pack controller interface
  • ESS stack communication
  • Isolated SPI for high-voltage systems
Product Introduction: LTC6820HMS#TRPBF Product Introduction

The LTC6820HMS from Analog Devices is an isoSPI to SPI bridge that provides galvanic isolation for battery management daisy-chains. It translates standard SPI from the host MCU to the isolated isoSPI protocol used by LTC681x battery monitors. Transformer-based isolation eliminates optocouplers. Up to 1 MHz data rate supports fast battery stack polling.

Working Principle: LTC6820HMS#TRPBF Working Principle

The LTC6820 encodes SPI clock and data onto a differential pair using transformer coupling for galvanic isolation. On the receive side, it decodes the isoSPI signals back to standard SPI for the host MCU. The transformer provides both signal coupling and power isolation between the hot (high-voltage) and cold (MCU) domains.

Pin Description: LTC6820HMS#TRPBF Pin Definition and Functions
Pin Group Name Description
SPI SCK/SDI/SDO/CS Host SPI
isoSPI IP/IM Isolated differential pair
Application Scenarios: In which products and applications is LTC6820HMS#TRPBF used
  • BMS daisy-chain head
  • EV pack controller
  • Isolated SPI bridge
Alternative Models: What chips are recommended as replacements for LTC6820HMS#TRPBF
Model Manufacturer Key Difference

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1