Opens in a new tab

Home » Integrated Circuits ICs, MOSFETs » SQJ479EP-T1_GE3

SQJ479EP-T1_GE3

P-ch -60V -50A, 13mOhm, PowerPAK SO-8, -55 to 175C

10231

Effective Inventory

Image for reference only

Manufacturer Part:

SQJ479EP-T1_GE3

Package:

PowerPAK SO-8 (5.0×6.0x1.1mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Vishay SQJ479EP-T1_GE3 is a P-channel power MOSFET. -60V, -50A, low RDS(on) 13 mOhm, PowerPAK SO-8 package for high-side switching.

Key Specifications

Type P-Channel Power MOSFET
VDS -60V
ID -50A
RDS(on) 13 mOhm @ VGS=-10V
Qg 48 nC typ
Operating Temp -55 to +175C
Package PowerPAK SO-8

Features

  • -60V/-50A P-channel
  • 13 mOhm low RDS(on)
  • PowerPAK SO-8 for low Rth
  • 48nC moderate Qg
  • Complementary to N-ch for half-bridge
  • RoHS compliant

Applications

  • High-side load switch
  • Battery disconnect switch
  • Half-bridge P-side FET
  • Reverse polarity protection
Product Introduction: SQJ479EP-T1_GE3 Product Introduction

The SQJ479EP-T1_GE3 from Vishay is a -60V -50A P-channel MOSFET in PowerPAK SO-8. 13 mOhm RDS(on) for efficient high-side switching without charge pump. The P-channel simplifies high-side load switch design since the gate is pulled to ground to turn on – no boost voltage needed. PowerPAK SO-8 provides excellent thermal performance.

Working Principle: SQJ479EP-T1_GE3 Working Principle

A negative VGS (gate below source) creates an inversion channel connecting source to drain. For high-side switching, the source is connected to the supply rail and the gate is pulled to ground to turn on. No gate drive voltage above the supply is needed, unlike N-channel high-side which requires a charge pump or bootstrap.

Pin Description: SQJ479EP-T1_GE3 Pin Definition and Functions
Pin Name Description
1 S Source
2 G Gate
3-8 D Drain (pad)
Application Scenarios: In which products and applications is SQJ479EP-T1_GE3 used
  • High-side switch
  • Battery disconnect
  • Reverse polarity protect
Alternative Models: What chips are recommended as replacements for SQJ479EP-T1_GE3
Model Manufacturer Key Difference

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1