Opens in a new tab

Home » Integrated Circuits ICs » SP485EN-L/TR

SP485EN-L/TR

RS-485 transceiver, 3.3V, 250kbps, SOIC-8, -40 to 85C

13511

Effective Inventory

Image for reference only

Manufacturer Part:

SP485EN-L/TR

Package:

SOIC-8 (3.9×4.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SP485EN-L/TR is a low-power RS-485/RS-422 transceiver. 3.3V supply, 250kbps data rate, -40 to 85C, SOIC-8 for industrial communication.

Key Specifications

Type RS-485/RS-422 Transceiver
Supply Voltage 3.3V
Data Rate 250 kbps
Driver Output ±2.0V min into 54 ohm
Receiver Input Sensitivity ±200 mV
Supply Current ~300 uA typ
ESD Protection ±15 kV HBM
Operating Temp -40 to +85C
Package SOIC-8

Features

  • 3.3V low-power operation
  • 250kbps data rate
  • Half-duplex RS-485
  • ±15kV ESD protection
  • ~300uA low supply current
  • Fail-safe receiver
  • SOIC-8 footprint
  • RoHS compliant

Applications

  • Industrial RS-485 network
  • Building automation
  • Motor drive communication
  • Remote sensor interface
Product Introduction: SP485EN-L/TR Product Introduction

The SP485EN-L/TR is a low-power 3.3V RS-485/RS-422 half-duplex transceiver in SOIC-8 package. 250kbps data rate for standard industrial communication. ~300uA supply current for power-efficient bus nodes. ±15kV ESD protection on bus pins. Fail-safe receiver ensures logic-high output when bus is idle or all drivers disabled.

Working Principle: SP485EN-L/TR Working Principle

The driver converts single-ended TTL/CMOS logic to differential RS-485 levels (A-B > 1.5V for logic 1, A-B < -1.5V for logic 0). The receiver converts differential bus levels back to single-ended logic. The half-duplex architecture shares A/B pins between driver and receiver with enable/disable controls. The 3.3V supply reduces power versus 5V transceivers. Current limiting and thermal shutdown protect the driver from bus faults.

Pin Description: SP485EN-L/TR Pin Definition and Functions
Pin Name Description
1 RO Receiver output
2 RE Receiver enable (active low)
3 DE Driver enable
4 DI Driver input
5 GND Ground
6 A Bus non-inverting
7 B Bus inverting
8 VCC 3.3V supply
Application Scenarios: In which products and applications is SP485EN-L/TR used
  • Industrial RS-485
  • Building automation
  • Motor drive comm
Alternative Models: What chips are recommended as replacements for SP485EN-L/TR
Model Manufacturer Key Difference

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1