Opens in a new tab

Home » Integrated Circuits ICs » LM2586SX-ADJ/NOPB

LM2586SX-ADJ/NOPB

3A boost DC-DC, 4-40V in, adj out, TO-263-7, 200kHz

13875

Effective Inventory

Image for reference only

Manufacturer Part:

LM2586SX-ADJ/NOPB

Package:

TO-263-7 (10.3×8.6mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TI LM2586SX-ADJ/NOPB is a SIMPLE SWITCHER 3A step-up (boost) DC-DC converter. 4V-40V input, adjustable output up to 40V, 200kHz, TO-263-7.

Key Specifications

Type Step-Up (Boost) DC-DC Converter
Input Voltage 4V to 40V
Output Voltage Adjustable up to 40V
Switch Current 3A
Switching Frequency 200 kHz
Efficiency Up to 90%
Operating Temp -40 to +125C
Package TO-263-7 (DDPAK)

Features

  • 3A boost converter
  • 4V-40V wide input range
  • Adjustable output to 40V
  • 200kHz switching frequency
  • Up to 90% efficiency
  • TO-263-7 surface-mount
  • RoHS compliant

Applications

  • 12V to 24V boost converter
  • LED string boost driver
  • Industrial 24V/48V supply
  • Battery-powered boost
Product Introduction: LM2586SX-ADJ/NOPB Product Introduction

The LM2586SX-ADJ/NOPB from TI is a SIMPLE SWITCHER 3A step-up DC-DC converter in TO-263-7 (DDPAK) package. 4V-40V input range for battery and industrial supply boosting. Adjustable output up to 40V. 200kHz fixed switching frequency. Up to 90% efficiency. The -ADJ version sets output voltage via external resistor divider. Internal NPN switch rated at 3A and 60V.

Working Principle: LM2586SX-ADJ/NOPB Working Principle

A current-mode PWM controller drives an internal 3A NPN power switch. During switch on-time, current builds in the external inductor. During off-time, inductor current flows through the output diode to the load and output capacitor. The output voltage is Vout = Vin / (1 – D) where D is duty cycle. Current-mode control provides fast transient response and cycle-by-cycle current limiting for overload protection.

Pin Description: LM2586SX-ADJ/NOPB Pin Definition and Functions
Pin Name Description
1 BOOST Bootstrap
2 SW Switch output
3 GND Ground
4 FB Feedback
5 COMP Compensation
6 ON/OFF Shutdown
7 VIN Input supply
Application Scenarios: In which products and applications is LM2586SX-ADJ/NOPB used
  • 12V to 24V boost
  • LED string driver
  • Industrial supply
Alternative Models: What chips are recommended as replacements for LM2586SX-ADJ/NOPB
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1