Opens in a new tab

Home » Integrated Circuits ICs » INA121UA/2K5

INA121UA/2K5

FET-input IA, 10pA Ib, 25uA, G=1-10k, SOIC-8, -40 to 85C

12640

Effective Inventory

Image for reference only

Manufacturer Part:

INA121UA/2K5

Package:

SOIC-8 (3.9×4.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TI INA121UA/2K5 is a low-power FET-input instrumentation amplifier. 25uA supply, gain 1-10000 via external resistor, SOIC-8 for precision measurement.

Key Specifications

Type FET-Input Instrumentation Amplifier
Gain Range 1 to 10000 (external Rset)
Input Bias Current 10 pA typ (FET)
Input Offset Voltage +-1 mV max
CMRR 84 dB min (G=100)
Bandwidth 450 kHz / G
Supply Voltage +-2.25V to +-18V or 4.5V to 36V
Supply Current 25 uA typ
Operating Temp -40 to +85C
Package SOIC-8

Features

  • FET-input: 10pA Ib for high-Z sensors
  • 25uA ultra-low supply current
  • Gain 1-10000 via external resistor
  • 84dB CMRR at G=100
  • +-2.25V to +-18V dual supply
  • SOIC-8 footprint
  • RoHS compliant

Applications

  • Medical ECG/EEG front-end
  • Photodiode transimpedance
  • pH electrode measurement
  • High-impedance sensor interface
Product Introduction: INA121UA/2K5 Product Introduction

The INA121UA/2K5 from TI is a low-power FET-input instrumentation amplifier in SOIC-8 package. 10pA input bias current for high-impedance sensor interfaces (pH electrodes, photodiodes, ECG). 25uA supply current for battery-powered measurement. Gain set by a single external resistor from 1 to 10000. 84dB CMRR at G=100 rejects common-mode interference.

Working Principle: INA121UA/2K5 Working Principle

Three-op-amp instrumentation amplifier architecture. The input stage uses JFET-input op-amps for 10pA input bias current. The two input buffers apply gain (1 + 2*R1/Rg) to the differential signal while passing common-mode voltage with unity gain. The output difference amplifier rejects common-mode voltage and provides the final gain of 1. The gain resistor Rg connects between pins 1 and 8.

Pin Description: INA121UA/2K5 Pin Definition and Functions
Pin Name Description
1 Rg Gain resistor
2 Vin- Inverting input
3 Vin+ Non-inverting input
4 V- Negative supply
5 Ref Reference
6 Vout Output
7 V+ Positive supply
8 Rg Gain resistor
Application Scenarios: In which products and applications is INA121UA/2K5 used
  • ECG/EEG front-end
  • Photodiode amp
  • pH electrode
Alternative Models: What chips are recommended as replacements for INA121UA/2K5
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1