Opens in a new tab

Home » Integrated Circuits ICs » DRV8848PWPR

DRV8848PWPR

Dual H-bridge, 1.5A, 8.2-40V, TSSOP-28, -40 to 125C

10722

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8848PWPR

Package:

TSSOP-28 (4.4×9.7mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TI DRV8848PWPR is a dual H-bridge motor driver. 1.5A per bridge, 8.2V-40V supply, TSSOP-28 for brushed DC and stepper motor driving.

Key Specifications

Type Dual H-Bridge Motor Driver
Bridges 2
Output Current 1.5A per bridge (RMS)
Supply Voltage 8.2V to 40V
Rds On 400 mOhm per FET (HS+LS)
PWM Frequency Up to 200 kHz
Protection OCP, OTP, UVLO, OVP
Operating Temp -40 to +125C
Package TSSOP-28 (4.4×9.7mm)

Features

  • Dual H-bridge for 2 DC or 1 stepper
  • 1.5A RMS per bridge
  • 8.2V-40V wide motor supply
  • 400 mOhm Rds on per FET
  • OCP/OTP/UVLO/OVP protection
  • Up to 200kHz PWM
  • TSSOP-28 footprint
  • RoHS compliant

Applications

  • Brushed DC motor drive
  • Stepper motor drive
  • Solenoid/valve control
  • Robotics motor control
Product Introduction: DRV8848PWPR Product Introduction

The DRV8848PWPR from TI is a dual H-bridge motor driver in TSSOP-28 package. 1.5A RMS per bridge for driving two brushed DC motors or one stepper motor. 8.2V-40V motor supply range. 400 mOhm total Rds on (HS+LS) for efficient operation. Comprehensive protection: overcurrent (OCP), overtemperature (OTP), undervoltage lockout (UVLO), and overvoltage (OVP).

Working Principle: DRV8848PWPR Working Principle

Each H-bridge consists of four N-channel MOSFETs (2 high-side, 2 low-side) in an H configuration. PWM input controls the MOSFETs to drive current through the motor winding in either direction. The internal charge pump generates gate drive voltage above the supply for high-side N-channel MOSFETs. Decay mode (slow/fast/auto) controls current recirculation during PWM off-time. Overcurrent protection senses FET current and disables the bridge on fault.

Pin Description: DRV8848PWPR Pin Definition and Functions
Pin Name Description
1-2 AOUT1/2 Bridge A output
3-4 BOUT1/2 Bridge B output
5 VCP Charge pump
6 VM Motor supply
Application Scenarios: In which products and applications is DRV8848PWPR used
  • DC motor drive
  • Stepper motor
  • Robotics
Alternative Models: What chips are recommended as replacements for DRV8848PWPR
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1