Opens in a new tab

Home » Integrated Circuits ICs » DRV8803DWR

DRV8803DWR

Single H-bridge, 2.8A pk, 8-36V, SOIC-16, -40 to 125C

3836

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8803DWR

Package:

SOIC-16 (3.9×9.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TI DRV8803DWR is a single full H-bridge motor driver. 2.8A peak, 8V-36V supply, SOIC-16 for brushed DC motor and solenoid driving.

Key Specifications

Type Single Full H-Bridge Motor Driver
Output Current 2.8A peak, 1.5A RMS
Supply Voltage 8V to 36V
Rds On 500 mOhm per FET (HS+LS)
Protection OCP, OTP, UVLO
Operating Temp -40 to +125C
Package SOIC-16 (3.9×9.9mm)

Features

  • Single H-bridge for 1 DC motor
  • 2.8A peak, 1.5A RMS
  • 8V-36V motor supply
  • 500 mOhm Rds on per FET
  • OCP/OTP/UVLO protection
  • SOIC-16 footprint
  • RoHS compliant

Applications

  • Brushed DC motor
  • Solenoid/relay driver
  • Valve actuator
  • Peristaltic pump
Product Introduction: DRV8803DWR Product Introduction

The DRV8803DWR from TI is a single full H-bridge motor driver in SOIC-16 package. 2.8A peak (1.5A RMS) for brushed DC motor and solenoid driving. 8V-36V motor supply. 500 mOhm Rds on per FET. Overcurrent, overtemperature, and undervoltage lockout protection. PHASE/ENABLE interface for simple direction and speed control.

Working Principle: DRV8803DWR Working Principle

Four N-channel MOSFETs in H configuration drive current through the motor winding in either direction. PHASE input sets motor direction. ENABLE input controls PWM for speed control. Internal charge pump generates above-supply gate voltage for high-side N-channel MOSFETs. Current recirculation through body diodes during PWM off-time (slow decay mode).

Pin Description: DRV8803DWR Pin Definition and Functions
Pin Name Description
1 VCP Charge pump
2 OUT1 Bridge output 1
3 OUT2 Bridge output 2
4 GND Ground
Application Scenarios: In which products and applications is DRV8803DWR used
  • DC motor drive
  • Solenoid driver
  • Valve actuator
Alternative Models: What chips are recommended as replacements for DRV8803DWR
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1