Opens in a new tab

Home » Integrated Circuits ICs » MCP6004T-E/ST

MCP6004T-E/ST

Quad RRIO op-amp, 1MHz, 100uA/ch, TSSOP-14, -40 to 125C

14186

Effective Inventory

Image for reference only

Manufacturer Part:

MCP6004T-E/ST

Package:

TSSOP-14 (4.4x5x0.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Microchip MCP6004T-E/ST is a quad 1MHz rail-to-rail CMOS op-amp. 1.8V-6V supply, 100uA/ch, TSSOP-14 for signal conditioning arrays.

Key Specifications

Type Quad Rail-to-Rail CMOS Op-Amp
GBW 1 MHz
Slew Rate 0.6 V/us
Supply Voltage 1.8V to 6V
Supply Current 100 uA per amplifier
Input Offset Voltage +-7 mV max (E grade)
Noise 28 nV/sqrtHz @ 1kHz
Operating Temp -40 to +125C (E grade)
Package TSSOP-14 (4.4x5mm)

Features

  • Quad RRIO op-amp in TSSOP-14
  • 1.8V-6V wide supply range
  • 100uA per amplifier low IQ
  • 1MHz GBW for signal filtering
  • E-grade +-7mV offset, -40 to 125C
  • CMOS input (pA bias current)
  • RoHS compliant

Applications

  • Multi-channel signal conditioning
  • Sensor array front-end
  • Active filter array
  • Portable instrumentation
Product Introduction: MCP6004T-E/ST Product Introduction

The MCP6004T-E/ST from Microchip is a quad 1MHz rail-to-rail CMOS operational amplifier in TSSOP-14 package. 1.8V-6V supply range for battery and low-voltage operation. 100uA per amplifier for power-efficient multi-channel signal conditioning. E-grade +-7mV offset and -40 to 125C industrial temperature. CMOS input with pA bias current for sensor interfaces.

Working Principle: MCP6004T-E/ST Working Principle

Four independent CMOS op-amps with rail-to-rail input and output stages. The input stage uses complementary N and P differential pairs for full common-mode range. The output stage uses common-source amplifiers for rail-to-rail output swing. Internal compensation provides unity-gain stability. The 100uA IQ is set by a bias current generator shared by all four amplifiers.

Pin Description: MCP6004T-E/ST Pin Definition and Functions
Pin Name Description
1 1OUT Amp 1 output
2 1IN- Amp 1 inverting
3 1IN+ Amp 1 non-inverting
4 VSS Ground
5-7 2IN+/2IN-/2OUT Amp 2
8-10 3OUT/3IN-/3IN+ Amp 3
11 VDD Supply
12-14 4IN+/4IN-/4OUT Amp 4
Application Scenarios: In which products and applications is MCP6004T-E/ST used
  • Multi-ch signal cond
  • Sensor array
  • Active filter
Alternative Models: What chips are recommended as replacements for MCP6004T-E/ST
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1