Opens in a new tab

Home » Integrated Circuits ICs » SN65LBC182P

SN65LBC182P

RS-485, 12Mbps, 120ohm term, DIP-8, -40 to 85C

5105

Effective Inventory

Image for reference only

Manufacturer Part:

SN65LBC182P

Package:

DIP-8 (9.6×6.5mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TI SN65LBC182P is an RS-485/RS-422 fail-safe transceiver. 5V, 12Mbps, integrated termination, DIP-8 for industrial communication networks.

Key Specifications

Type RS-485/RS-422 Fail-Safe Transceiver
Data Rate 12 Mbps
Supply Voltage 5V
Integrated Termination 120 ohm (switchable)
Receiver Fail-Safe Open/short/idle bus = high
ESD Protection +/-16 kV IEC 61000-4-2
Operating Temp -40 to +85C
Package DIP-8 (9.6×6.5mm)

Features

  • 12Mbps high-speed RS-485
  • Integrated 120 ohm termination
  • Fail-safe receiver on idle bus
  • +/-16kV IEC ESD protection
  • DIP-8 through-hole
  • 5V supply
  • RoHS compliant

Applications

  • High-speed RS-485 network
  • Profibus DP communication
  • Multi-drop industrial bus
  • Motion control network
Product Introduction: SN65LBC182P Product Introduction

The SN65LBC182P from TI is an RS-485/RS-422 fail-safe transceiver in DIP-8 package. 12Mbps data rate for high-speed industrial networks (Profibus DP). Integrated switchable 120 ohm termination eliminates external termination resistor. Fail-safe receiver ensures logic-high output on open, shorted, or idle bus. +/-16kV IEC 61000-4-2 ESD protection on bus pins.

Working Principle: SN65LBC182P Working Principle

The driver converts CMOS logic to differential RS-485 levels with controlled slew rate for 12Mbps operation. The receiver has a precision threshold set slightly above 0V differential (fail-safe), so an idle bus (0V diff) is correctly received as logic-high. The integrated 120 ohm termination can be enabled/disabled via the TE (termination enable) pin. The LBC182 includesTransient Voltage Suppression (TVS) diodes on bus pins for +/-16kV ESD protection per IEC 61000-4-2.

Pin Description: SN65LBC182P Pin Definition and Functions
Pin Name Description
1 R Receiver output
2 RE Receiver enable
3 DE Driver enable
4 D Driver input
5 GND Ground
6 A Bus A
7 B Bus B
8 VCC 5V supply
Application Scenarios: In which products and applications is SN65LBC182P used
  • High-speed RS-485
  • Profibus DP
  • Motion control net
Alternative Models: What chips are recommended as replacements for SN65LBC182P
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1