Opens in a new tab

Home » Integrated Circuits ICs » TPS2012DR

TPS2012DR

2A power switch, 50mOhm, SOIC-8, 2.7-5.5V, -40 to 85C

6487

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2012DR

Package:

SOIC-8 (3.9×4.9mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TI TPS2012DR is a 2A N-channel MOSFET power distribution switch. 2.7V-5.5V, 50mOhm Rds, SOIC-8 for USB port power and hot-swap control.

Key Specifications

Type N-Channel MOSFET Power Distribution Switch
Output Current 2A (continuous)
Rds On 50 mOhm typ
Supply Voltage 2.7V to 5.5V
Current Limit 2.2A (fixed)
Rise Time 4ms typ (controlled slew)
Operating Temp -40 to +85C
Package SOIC-8 (3.9×4.9mm)

Features

  • 2A power distribution switch
  • 50 mOhm low Rds on
  • 2.2A fixed current limit
  • 4ms controlled output slew rate
  • 2.7V-5.5V for USB/peripheral power
  • SOIC-8 footprint
  • RoHS compliant

Applications

  • USB port power switching
  • Hot-plug power control
  • PCMCIA slot power
  • Peripheral power distribution
Product Introduction: TPS2012DR Product Introduction

The TPS2012DR from TI is a 2A N-channel MOSFET power distribution switch in SOIC-8 package. 50 mOhm Rds on for minimal voltage drop. 2.2A fixed current limit for USB port power protection. 4ms controlled output rise time limits inrush current during hot-plug events. 2.7V-5.5V supply for USB, PCMCIA, and peripheral power distribution. Overcurrent and overtemperature fault reporting via OC output.

Working Principle: TPS2012DR Working Principle

An internal charge pump generates gate voltage above the supply for the N-channel MOSFET power switch. When EN is high, the MOSFET turns on with controlled slew rate (4ms rise) to limit inrush current into the load capacitance. Current is sensed and limited to 2.2A. If overcurrent persists, thermal shutdown activates. The OC (open-drain) output asserts low on fault for host notification. UVLO prevents switch turn-on below 2.5V.

Pin Description: TPS2012DR Pin Definition and Functions

Pin Name Description
1 GND Ground
2 IN Power input
3 IN Power input
4 EN Enable
5 OC Fault output
6 GND Ground
7,8 OUT Power output
Application Scenarios: In which products and applications is TPS2012DR used
  • USB port power
  • Hot-plug control
  • Peripheral power
Alternative Models: What chips are recommended as replacements for TPS2012DR
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1