Opens in a new tab

Home » Integrated Circuits ICs » IFX25001TFV33ATMA2

IFX25001TFV33ATMA2

Auto LDO 3.3V 150mA, 4-40V in, TSSOP-9, -40 to 150C

5946

Effective Inventory

Image for reference only

Manufacturer Part:

IFX25001TFV33ATMA2

Package:

PG-TSSOP-9 (3×4.4mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Infineon IFX25001TFV33ATMA2 is an automotive 3.3V 150mA LDO regulator. AEC-Q100, 40V max input, PG-TSSOP-8 for car ECU power.

Key Specifications

Type Automotive LDO Regulator
AEC-Q100 Grade 0 (-40 to 150C junction)
Output Voltage 3.3V fixed
&Output Current 150 mA
Input Voltage 4V to 40V
Dropout Voltage 400 mV typ @ 150mA
Quiescent Current 30 uA typ
Operating Temp -40 to +150C (junction)
Package PG-TSSOP-9 (3×4.4mm)

Features

  • AEC-Q100 Grade 0 (150C Tj)
  • 3.3V 150mA fixed output
  • 4V-40V wide input range
  • 30uA low quiescent current
  • PG-TSSOP-9 footprint
  • Automotive ECU power supply
  • RoHS compliant

Applications

  • Automotive ECU 3.3V supply
  • Car sensor 3.3V rail
  • Auto MCU I/O power
  • Battery-connected 12V/24V LDO
Product Introduction: IFX25001TFV33ATMA2 Product Introduction

The IFX25001TFV33ATMA2 from Infineon is an automotive-grade 3.3V 150mA LDO regulator in PG-TSSOP-9 package. AEC-Q100 Grade 0 qualified for -40 to 150C junction temperature. 4V-40V input range withstands automotive load dump transients. 30uA quiescent current for low standby power. 3.3V fixed output for automotive ECU MCU and sensor power. Reset output (POR) holds MCU in reset until output is stable.

Working Principle: IFX25001TFV33ATMA2 Working Principle

A P-channel MOSFET pass element driven by an error amplifier with a trimmed 3.3V bandgap reference. The P-channel architecture requires no charge pump, enabling 30uA IQ. The 40V maximum input is achieved by a high-voltage P-channel process. The Power-On Reset (POR) output goes active when VOUT is below 90% of 3.3V, holding the MCU in reset during supply transients. Current limiting and overtemperature protection ensure safe operation.

Pin Description: IFX25001TFV33ATMA2 Pin Definition and Functions
Pin Name Description
1 IN Input
2 GND Ground
5 OUT 3.3V output
6 RO Reset output
8 EN Enable
Application Scenarios: In which products and applications is IFX25001TFV33ATMA2 used
  • Auto ECU 3.3V
  • Car sensor rail
  • Auto MCU power
Alternative Models: What chips are recommended as replacements for IFX25001TFV33ATMA2
Model Manufacturer Key Difference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1