Opens in a new tab

EC103DAP

SCR 1A 400V, 200uA gate, TO-92, -40 to 125C

12056

Effective Inventory

Image for reference only

Manufacturer Part:

EC103DAP

Package:

TO-92 (5.2×5.2mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EC103DAP is a 1A, 400V sensitive gate SCR. TO-92 for low-power AC switching, crowbar, and alarm circuits.

Key Specifications

Type Sensitive Gate SCR
IT(RMS) 1 A
VDRM/VRRM 400 V
IGT 200 uA max (sensitive gate)
IH 5 mA max
VTM 1.6V max @ 1A
Operating Temp -40 to +125C
Package TO-92 (5.2×5.2mm)

Features

  • 1A low-current SCR
  • 400V blocking voltage
  • 200uA ultra-sensitive gate
  • TO-92 through-hole
  • For low-power AC switching
  • RoHS compliant

Applications

  • Overvoltage crowbar
  • Alarm bell driver
  • Small solenoid driver
  • Low-power lamp dimming
Product Introduction: EC103DAP Product Introduction

The EC103DAP is a 1A 400V sensitive gate SCR in TO-92 package. 200uA ultra-sensitive gate trigger current for direct CMOS logic drive without amplification. 1A RMS current for low-power AC switching. For overvoltage crowbar protection (triggers SCR to blow fuse on OVP), alarm bell driving, small solenoid control, and low-power lamp dimming.

Working Principle: EC103DAP Working Principle

PNPN four-layer structure latches on when gate current exceeds 200uA. The ultra-sensitive gate allows direct connection to CMOS microcontroller outputs (4mA sink/source >> 200uA gate trigger). Once latched, the SCR conducts until anode current drops below 5mA holding current. In AC circuits, self-commutation occurs at zero crossing. The crowbar application connects the SCR across the supply; on overvoltage, the gate is triggered, the SCR shorts the supply rail, and the fuse blows, protecting the load.

Pin Description: EC103DAP Pin Definition and Functions
Pin Name Description
1 K Cathode
2 A Anode (case)
3 G Gate
Application Scenarios: In which products and applications is EC103DAP used
  • OVP crowbar
  • Alarm driver
  • Solenoid driver
Alternative Models: What chips are recommended as replacements for EC103DAP
Model Manufacturer Key Difference

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1