Opens in a new tab

Home » Integrated Circuits ICs » LMC7211AIM5X/NOPB

LMC7211AIM5X/NOPB

LMC7211AIM5X/NOPB – Comparator

3126

Effective Inventory

Image for reference only

Manufacturer Part:

LMC7211AIM5X/NOPB

Package:

SOT-23-5 (2.9×1.6mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMC7211AIM5X/NOPB is a TI micropower CMOS comparator in SOT-23-5. 7uA supply current makes it ideal for battery-powered applications. Sub-pA input bias current for high-impedance sensor interfacing. 2.7V-15V wide supply range. Push-pull CMOS output eliminates pull-up resistor. Tiny SOT-23-5 footprint.

Key Specifications

Type Micropower CMOS Comparator
Supply Voltage 2.7V to 15V
Supply Current 7 uA typ
Input Offset 6 mV max
Input Bias Current < 1 pA
Propagation Delay 4 us typ at 5V
Output Type Push-pull CMOS
Operating Temp -40 to +85C
Package SOT-23-5

Working Principle

The LMC7211 uses a CMOS input stage achieving picoampere input bias current. The output stage is push-pull CMOS, actively driving both high and low without external pull-up resistor. The comparator uses a two-stage architecture: a differential input pair feeds a gain stage that drives the CMOS output. Micropower is achieved by biasing the input stage at sub-microampere levels. The device operates in both single and split supply configurations.

Applications

  • Battery monitors
  • Sensor thresholds
  • Window comparators
  • Level detection
Product Introduction: LMC7211AIM5X/NOPB Product Introduction

The LMC7211AIM5X/NOPB is a TI micropower CMOS comparator in SOT-23-5. 7uA supply current makes it ideal for battery-powered applications. Sub-pA input bias current for high-impedance sensor interfacing. 2.7V-15V wide supply range. Push-pull CMOS output eliminates pull-up resistor. Tiny SOT-23-5 footprint.

Working Principle: LMC7211AIM5X/NOPB Working Principle

The LMC7211 uses a CMOS input stage achieving picoampere input bias current. The output stage is push-pull CMOS, actively driving both high and low without external pull-up resistor. The comparator uses a two-stage architecture: a differential input pair feeds a gain stage that drives the CMOS output. Micropower is achieved by biasing the input stage at sub-microampere levels. The device operates in both single and split supply configurations.

Pin Description: LMC7211AIM5X/NOPB Pin Definition and Functions
Pin Name Desc
1 VOUT Output
2 V- Inverting input
3 V+ Non-inverting input
4 GND Negative supply
5 VDD Positive supply
Application Scenarios: In which products and applications is LMC7211AIM5X/NOPB used
  • Battery monitors
  • Sensor thresholds
  • Window comparators
  • Level detection
Alternative Models: What chips are recommended as replacements for LMC7211AIM5X/NOPB
Model Vendor Diff
LMC7211BJ5X TI Commercial grade

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1