Opens in a new tab

Home » Integrated Circuits ICs » EPC2LC20N

EPC2LC20N

EPC2LC20N – FPGA Configuration Device

9500

Effective Inventory

Image for reference only

Manufacturer Part:

EPC2LC20N

Package:

PLCC-20

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EPC2LC20N is an Intel/Altera serial configuration device for FPGAs. 2Mbit density for storing configuration data for APEX, FLEX, and Cyclone FPGAs. Active Serial interface for single-FPGA configuration. JTAG in-system programmable. PLCC-20 package.

Key Specifications

Type Serial Configuration Device (EPC2)
Density 1,705,984 bits (2 Mbit)
Interface Active Serial (AS)
Clock Frequency Up to 20 MHz (DCLK)
Programming JTAG ISP
Supply Voltage 3.3V
Operating Temp 0 to +70C (Commercial)
Package PLCC-20

Working Principle

The EPC2 stores FPGA configuration bitstreams in non-volatile flash memory. On power-up, the EPC2 automatically clocks out the configuration data to the FPGA via the Active Serial (AS) interface using DCLK and DATA0 signals. The nCS pin selects the device; nCONF_DONE signals successful configuration. The EPC2 supports page mode for storing multiple configuration files. JTAG interface allows in-system programming of the flash memory without removing the device.

Applications

  • FPGA configuration storage
  • Active Serial programming
  • Multi-page configurations
Product Introduction: EPC2LC20N Product Introduction

The EPC2LC20N is an Intel/Altera serial configuration device for FPGAs. 2Mbit density for storing configuration data for APEX, FLEX, and Cyclone FPGAs. Active Serial interface for single-FPGA configuration. JTAG in-system programmable. PLCC-20 package.

Working Principle: EPC2LC20N Working Principle

The EPC2 stores FPGA configuration bitstreams in non-volatile flash memory. On power-up, the EPC2 automatically clocks out the configuration data to the FPGA via the Active Serial (AS) interface using DCLK and DATA0 signals. The nCS pin selects the device; nCONF_DONE signals successful configuration. The EPC2 supports page mode for storing multiple configuration files. JTAG interface allows in-system programming of the flash memory without removing the device.

Pin Description: EPC2LC20N Pin Definition and Functions
Pin Name Desc
DCLK Clock Serial clock output
DATA0 Data Serial data output
nCS Chip Select Active low select
JTAG TCK/TDI/TDO/TMS Programming
Application Scenarios: In which products and applications is EPC2LC20N used
  • FPGA configuration storage
  • Active Serial programming
  • Multi-page configurations
Alternative Models: What chips are recommended as replacements for EPC2LC20N
Model Vendor Diff
EPC4 Intel 4 Mbit

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1