Opens in a new tab

Home » Integrated Circuits ICs » MCP609T-I/SL

MCP609T-I/SL

MCP609T-I/SL – Op Amp (Micropower)

3603

Effective Inventory

Image for reference only

Manufacturer Part:

MCP609T-I/SL

Package:

TSSOP-14 (4.4x5mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP609T-I/SL is a Microchip quad micropower CMOS op amp with 0.9uA per channel. Rail-to-rail input and output. 1.4V-5.5V supply. 155kHz GBW. Ultra-low supply current makes it ideal for battery-powered applications. TSSOP-14 industrial package.

Key Specifications

Type Quad Micropower CMOS Op Amp
Channels 4
Supply Voltage 1.4V to 5.5V
GBW 155 kHz
Slew Rate 0.08 V/us
Supply Current 0.9 uA per channel
Input Offset +/-3 mV max
Rail-to-Rail Input and Output
Operating Temp -40 to +85C (Industrial)
Package TSSOP-14

Working Principle

The MCP609 uses a CMOS input stage with rail-to-rail common-mode range achieved by parallel N-channel and P-channel differential pairs. The output stage is a CMOS push-pull that swings to both supply rails. Micropower operation is achieved by biasing the input stage and gain stage at sub-microampere levels. The 0.9uA per-channel supply current enables years of operation from coin cells. The chip select (CS) pin on MCP609 puts the device in shutdown mode with 100nA supply current.

Applications

  • Battery-powered systems
  • Portable instruments
  • Sensor conditioning
  • Low-power filters
Product Introduction: MCP609T-I/SL Product Introduction

The MCP609T-I/SL is a Microchip quad micropower CMOS op amp with 0.9uA per channel. Rail-to-rail input and output. 1.4V-5.5V supply. 155kHz GBW. Ultra-low supply current makes it ideal for battery-powered applications. TSSOP-14 industrial package.

Working Principle: MCP609T-I/SL Working Principle

The MCP609 uses a CMOS input stage with rail-to-rail common-mode range achieved by parallel N-channel and P-channel differential pairs. The output stage is a CMOS push-pull that swings to both supply rails. Micropower operation is achieved by biasing the input stage and gain stage at sub-microampere levels. The 0.9uA per-channel supply current enables years of operation from coin cells. The chip select (CS) pin on MCP609 puts the device in shutdown mode with 100nA supply current.

Pin Description: MCP609T-I/SL Pin Definition and Functions
Pin Group Name Desc
A OUTA, +INA, -INA Op amp A
B OUTB, +INB, -INB Op amp B
C OUTC, +INC, -INC Op amp C
D OUTD, +IND, -IND Op amp D
Application Scenarios: In which products and applications is MCP609T-I/SL used
  • Battery-powered systems
  • Portable instruments
  • Sensor conditioning
  • Low-power filters
Alternative Models: What chips are recommended as replacements for MCP609T-I/SL
Model Vendor Diff
MCP604T-I/SL Microchip 1MHz GBW, 1uA

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1