Opens in a new tab

TL052CDR

Dual JFET-input precision op-amp, 3MHz GBW, SOIC-8

6849

Effective Inventory

Image for reference only

Manufacturer Part:

TL052CDR

Package:

SOIC-8

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TL052CDR from TI is a dual JFET-input precision operational amplifier with very low input bias current (30 pA) and low offset voltage (0.6 mV typical). It provides 3 MHz gain-bandwidth product and 3 V/µs slew rate, making it suitable for high-impedance sensor interfaces and precision signal conditioning.

Key Specifications

Function Dual JFET-input precision op-amp
Input Offset Voltage Typical 0.6 mV
Bias Current 30 pA (JFET input)
Gain-Bandwidth Product 3 MHz
Slew Rate 3 V/µs
Supply Voltage ±5V to ±18V
Package SOIC-8 (3.9×4.9mm)

Working Principle

JFET-input stage provides extremely low input bias current (30 pA) for high-impedance source interfacing without loading. Internal compensation ensures stability at unity gain. The dual configuration enables stereo audio, differential amplification, or cascaded filter stages in a single package.

Applications

  • High-impedance sensor interface (pH, photodiode)
  • Precision filter
  • Audio preamplifier
  • Data acquisition front-end
Product Introduction: TL052CDR Product Introduction

The TL052CDR from TI is a dual JFET-input precision operational amplifier with very low input bias current (30 pA) and low offset voltage (0.6 mV typical). It provides 3 MHz gain-bandwidth product and 3 V/µs slew rate, making it suitable for high-impedance sensor interfaces and precision signal conditioning.

Working Principle: TL052CDR Working Principle

JFET-input stage provides extremely low input bias current (30 pA) for high-impedance source interfacing without loading. Internal compensation ensures stability at unity gain. The dual configuration enables stereo audio, differential amplification, or cascaded filter stages in a single package.

Pin Description: TL052CDR Pin Definition and Functions
Pin Name Description
1 1OUT Channel 1 output
2 1IN- Channel 1 inverting input
3 1IN+ Channel 1 non-inverting input
4 VCC- Negative supply
5 2IN+ Channel 2 non-inverting input
6 2IN- Channel 2 inverting input
7 2OUT Channel 2 output
8 VCC+ Positive supply
Application Scenarios: In which products and applications is TL052CDR used
  • High-impedance sensor interface (pH, photodiode)
  • Precision filter
  • Audio preamplifier
  • Data acquisition front-end
Alternative Models: What chips are recommended as replacements for TL052CDR
Model Manufacturer Key Difference
TL072 TI Lower cost, higher offset
OPA2134 TI FET-input audio grade

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1