Opens in a new tab

Home » Integrated Circuits ICs » DS4422N+T&R

DS4422N+T&R

2-ch I2C 7-bit DAC, 50-200µA output, TDFN-8

8031

Effective Inventory

Image for reference only

Manufacturer Part:

DS4422N+T&R

Package:

TDFN-8

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DS4422N+T&R from Maxim is a 2-channel 7-bit I2C DAC with 50 µA to 200 µA sink/source output current range. It is designed for power supply margining and offset adjustment in server and networking equipment.

Key Specifications

Function I2C 2-channel 7-bit DAC
Channels 2
Resolution 7-bit (128 steps)
Interface I2C
Output Current 50 µA to 200 µA sink/source
Supply Voltage 3.0V to 5.5V
Package TDFN-8 (2x2mm)

Working Principle

Two 7-bit current DACs sink or source current from/to an external FB node of a DC-DC converter, adjusting the output voltage above or below nominal. The MSB of each 7-bit value sets direction (sink/source), the remaining 6 bits set magnitude. This enables ±margin adjustment for power supply validation testing.

Applications

  • Power supply margining
  • DC-DC output voltage trim
  • Sensor offset adjustment
  • Server PSU calibration
Product Introduction: DS4422N+T&R Product Introduction

The DS4422N+T&R from Maxim is a 2-channel 7-bit I2C DAC with 50 µA to 200 µA sink/source output current range. It is designed for power supply margining and offset adjustment in server and networking equipment.

Working Principle: DS4422N+T&R Working Principle

Two 7-bit current DACs sink or source current from/to an external FB node of a DC-DC converter, adjusting the output voltage above or below nominal. The MSB of each 7-bit value sets direction (sink/source), the remaining 6 bits set magnitude. This enables ±margin adjustment for power supply validation testing.

Pin Description: DS4422N+T&R Pin Definition and Functions
Pin Name Description
1 SCL I2C clock
2 SDA I2C data
3 GND Ground
4 OUT0 DAC channel 0 output
5 OUT1 DAC channel 1 output
6 VCC Supply
Application Scenarios: In which products and applications is DS4422N+T&R used
  • Power supply margining
  • DC-DC output voltage trim
  • Sensor offset adjustment
  • Server PSU calibration
Alternative Models: What chips are recommended as replacements for DS4422N+T&R
Model Manufacturer Key Difference
DS4424 Maxim 4-channel version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1