Opens in a new tab

Home » Integrated Circuits ICs » M74VHC1GT125DT1G

M74VHC1GT125DT1G

Single 3-state buffer, 5V-tolerant, SOT-353

4920

Effective Inventory

Image for reference only

Manufacturer Part:

M74VHC1GT125DT1G

Package:

SOT-353

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The M74VHC1GT125DT1G from onsemi is a single bus buffer/line driver with 3-state output in an ultra-compact SOT-353 package. 5V-tolerant inputs allow level translation from 5V to 3.3V domains. The active-low output enable provides tri-state for bus sharing.

Key Specifications

Function Single bus buffer with 3-state output
Supply Voltage 2.0V to 5.5V
Propagation Delay 3.0 ns at 3.3V
Output Drive ±8 mA at 3.3V
Input Tolerant 5.5V
Package SOT-353 (2.1×1.3mm)

Working Principle

When OE is LOW, the output follows the input (Y = A). When OE is HIGH, the output is in high-impedance (tri-state), allowing other devices to drive the bus. 5V-tolerant inputs accept signals above VCC, enabling mixed-voltage interfacing without damage.

Applications

  • Bus buffering with tri-state
  • 5V to 3.3V level translation
  • I/O port isolation
  • Glue logic
Product Introduction: M74VHC1GT125DT1G Product Introduction

The M74VHC1GT125DT1G from onsemi is a single bus buffer/line driver with 3-state output in an ultra-compact SOT-353 package. 5V-tolerant inputs allow level translation from 5V to 3.3V domains. The active-low output enable provides tri-state for bus sharing.

Working Principle: M74VHC1GT125DT1G Working Principle

When OE is LOW, the output follows the input (Y = A). When OE is HIGH, the output is in high-impedance (tri-state), allowing other devices to drive the bus. 5V-tolerant inputs accept signals above VCC, enabling mixed-voltage interfacing without damage.

Pin Description: M74VHC1GT125DT1G Pin Definition and Functions
Pin Name Description
1 OE Output enable (active low)
2 A Input
3 GND Ground
4 Y Output
5 VCC Supply
Application Scenarios: In which products and applications is M74VHC1GT125DT1G used
  • Bus buffering with tri-state
  • 5V to 3.3V level translation
  • I/O port isolation
  • Glue logic
Alternative Models: What chips are recommended as replacements for M74VHC1GT125DT1G
Model Manufacturer Key Difference
74LVC1G125 Nexperia Equivalent

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1