Opens in a new tab

Home » Integrated Circuits ICs » UCC21710DWR

UCC21710DWR

Isolated gate driver, 3kV, ±10A, DESAT+Miller clamp, SOIC-16W

2585

Effective Inventory

Image for reference only

Manufacturer Part:

UCC21710DWR

Package:

SOIC-16W

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The UCC21710DWR from TI is a reinforced isolated single IGBT/SiC MOSFET gate driver providing 3 kV RMS isolation, ±10 A peak drive, integrated DESAT fault detection, and active Miller clamp. It targets high-power inverters in EV, solar, and motor drive applications.

Key Specifications

Function Isolated single IGBT/SiC gate driver
Isolation 3 kV RMS reinforced
Output Current ±10 A peak
Propagation Delay 150 ns
Miller Clamp Active (1.5V clamp)
DESAT Integrated desaturation detect
Package SOIC-16W (10.3×7.5mm)

Working Principle

On-chip capacitive isolation barrier transfers control and fault signals across 3 kV RMS isolation. ±10 A totem-pole output drives IGBT/SiC gates with fast rise/fall. DESAT detection monitors collector-emitter voltage and triggers fault shutdown within 3 µs. Active Miller clamp sinks gate current through a dedicated clamp pin to prevent parasitic turn-on during high dv/dt transitions.

Applications

  • EV powertrain inverter
  • Solar inverter (string/central)
  • Motor drive (SiC/IGBT)
  • UPS / welder
Product Introduction: UCC21710DWR Product Introduction

The UCC21710DWR from TI is a reinforced isolated single IGBT/SiC MOSFET gate driver providing 3 kV RMS isolation, ±10 A peak drive, integrated DESAT fault detection, and active Miller clamp. It targets high-power inverters in EV, solar, and motor drive applications.

Working Principle: UCC21710DWR Working Principle

On-chip capacitive isolation barrier transfers control and fault signals across 3 kV RMS isolation. ±10 A totem-pole output drives IGBT/SiC gates with fast rise/fall. DESAT detection monitors collector-emitter voltage and triggers fault shutdown within 3 µs. Active Miller clamp sinks gate current through a dedicated clamp pin to prevent parasitic turn-on during high dv/dt transitions.

Pin Description: UCC21710DWR Pin Definition and Functions
Pin Name Description
1 VCC1 Primary supply
2 IN+ Positive input
3 IN- Negative input
4 FAULT Fault output
5 READY Ready indicator
6 OUTH Source output (turn-on)
7 OUTL Sink output (turn-off)
8 CLAMP Miller clamp output
Application Scenarios: In which products and applications is UCC21710DWR used
  • EV powertrain inverter
  • Solar inverter (string/central)
  • Motor drive (SiC/IGBT)
  • UPS / welder
Alternative Models: What chips are recommended as replacements for UCC21710DWR
Model Manufacturer Key Difference
UCC21750 TI SiC-optimized variant
AD82583 ADI Dual channel

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1