Opens in a new tab

Home » Integrated Circuits ICs » SN74HCT574DWR

SN74HCT574DWR

Octal D-type flip-flop, 3-state, 4.5-5.5V, TTL, DIP/SO-20

3007

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HCT574DWR

Package:

SOIC-20

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74HCT574DWR from TI is an octal D-type edge-triggered flip-flop with 3-state outputs in the HCT (TTL-compatible input) family. The 3-state outputs enable bus sharing, and TTL-compatible inputs allow direct interfacing with bipolar or 5V TTL logic.

Key Specifications

Function Octal D-type flip-flop with 3-state output
Supply Voltage 4.5V to 5.5V
Propagation Delay 20 ns at 5V
Output Drive ±6 mA at 5V
Input Logic TTL compatible (HCT)
Package SOIC-20 (7.6×10.3mm)

Working Principle

On the rising edge of CLK, the 8 D inputs are captured and stored. The active-low OE controls 3-state outputs for bus sharing. When OE=HIGH, outputs are high-impedance. The HCT variant has TTL-compatible input thresholds (VIH=2V, VIL=0.8V) while maintaining CMOS output levels for noise margin.

Applications

  • 5V bus register with tri-state
  • Output port latch
  • Microprocessor I/O expansion
  • TTL-to-CMOS interface
Product Introduction: SN74HCT574DWR Product Introduction

The SN74HCT574DWR from TI is an octal D-type edge-triggered flip-flop with 3-state outputs in the HCT (TTL-compatible input) family. The 3-state outputs enable bus sharing, and TTL-compatible inputs allow direct interfacing with bipolar or 5V TTL logic.

Working Principle: SN74HCT574DWR Working Principle

On the rising edge of CLK, the 8 D inputs are captured and stored. The active-low OE controls 3-state outputs for bus sharing. When OE=HIGH, outputs are high-impedance. The HCT variant has TTL-compatible input thresholds (VIH=2V, VIL=0.8V) while maintaining CMOS output levels for noise margin.

Pin Description: SN74HCT574DWR Pin Definition and Functions
Pin Name Description
1 OE Output enable (active low)
2-9 D1-D8 Data inputs
10 GND Ground
11 CLK Clock
12-19 Q1-Q8 3-state outputs
20 VCC 5V supply
Application Scenarios: In which products and applications is SN74HCT574DWR used
  • 5V bus register with tri-state
  • Output port latch
  • Microprocessor I/O expansion
  • TTL-to-CMOS interface
Alternative Models: What chips are recommended as replacements for SN74HCT574DWR
Model Manufacturer Key Difference
74HC574 Nexperia CMOS input version

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1