Opens in a new tab

Home » Integrated Circuits ICs » SN74CBTLV3253PW

SN74CBTLV3253PW

Dual 4:1 multiplexer/demux, 3.3V, 5-bit, low ON-resistance, TSSOP-20

14110

Effective Inventory

Image for reference only

Manufacturer Part:

SN74CBTLV3253PW

Package:

TSSOP-16

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74CBTLV3253PW from TI is a dual 4:1 multiplexer/demultiplexer with 6 ohm max ON resistance and >500 MHz bandwidth. Two independent 4:1 sections share common select lines, suitable for differential signal routing in high-speed data paths.

Key Specifications

Function Dual 4:1 multiplexer/demultiplexer
ON Resistance 6 ohm max
Supply Voltage 2.3V to 3.6V
Bandwidth >500 MHz
Charge Injection 1 pC
Channels 2 independent 4:1 MUX
Package TSSOP-16 (4.4x5mm)

Working Principle

Two 4:1 multiplexer sections each select one of four I/O ports under 2-bit address control (S0, S1). CBTLV (crossbar technology) uses nFET pass gates with low 6 ohm ON resistance and 1 pC charge injection for minimal signal degradation. Break-before-make switching prevents momentary channel-to-channel shorts. OE input disables both sections.

Applications

  • Differential signal routing
  • High-speed data path switching
  • Test equipment signal select
  • Video source selection
Product Introduction: SN74CBTLV3253PW Product Introduction

The SN74CBTLV3253PW from TI is a dual 4:1 multiplexer/demultiplexer with 6 ohm max ON resistance and >500 MHz bandwidth. Two independent 4:1 sections share common select lines, suitable for differential signal routing in high-speed data paths.

Working Principle: SN74CBTLV3253PW Working Principle

Two 4:1 multiplexer sections each select one of four I/O ports under 2-bit address control (S0, S1). CBTLV (crossbar technology) uses nFET pass gates with low 6 ohm ON resistance and 1 pC charge injection for minimal signal degradation. Break-before-make switching prevents momentary channel-to-channel shorts. OE input disables both sections.

Pin Description: SN74CBTLV3253PW Pin Definition and Functions
Pin Name Description
1-4 A1-A4 Section A I/O ports
5 A_COM Section A common
6-9 B1-B4 Section B I/O ports
10 B_COM Section B common
11-12 S0-S1 Select inputs
Application Scenarios: In which products and applications is SN74CBTLV3253PW used
  • Differential signal routing
  • High-speed data path switching
  • Test equipment signal select
  • Video source selection
Alternative Models: What chips are recommended as replacements for SN74CBTLV3253PW
Model Manufacturer Key Difference
ADG732 ADI 32:1 crossbar

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL41050TA-3E

NVE IL41050TA-3E IsoLoop isolated CAN transceiver, 2.5kVrms isolation, 1Mbps, 16-SOIC

Brand: nve

Package: SOIC-16 NB

IN STOCK: 3150pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4115TRLPBF

IRFS4115TRLPBF – 150V N-Channel HEXFET Power MOSFET, 12.1 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 6965pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMC7101AIM5X/NOPB

Single CMOS RRIO op-amp, 1.4MHz, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 11389pcs

Cargo cycle: 3-7 Days

The minimum order is 1