Opens in a new tab

MCP100T-315I/TT

Voltage supervisor, 3.15V threshold, 140ms delay, push-pull reset, SOT-23

5248

Effective Inventory

Image for reference only

Manufacturer Part:

MCP100T-315I/TT

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

MCP100T-315I/TT is a voltage supervisor/reset IC with 3.15V threshold, active-low reset, open-drain output, SOT-23-3 package, industrial temperature range.

Key Specifications

Function Voltage supervisor/reset
Threshold Voltage 3.15V
Reset Output Active-low, open-drain
Supply Voltage 1V to 5.5V
Reset Timeout 200 ms typical
Package SOT-23-3
Temperature Range -40°C to +85°C

Features

  • Precision 3.15V voltage threshold
  • Active-low open-drain reset output
  • 200ms reset timeout period
  • SOT-23-3 tiny package
  • Industrial temperature range

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: MCP100T-315I/TT Product Introduction

MCP100T-315I/TT is a voltage supervisor/reset IC with 3.15V threshold, active-low reset, open-drain output, SOT-23-3 package, industrial temperature range.

Working Principle: MCP100T-315I/TT Working Principle

The MCP100T-315I/TT is a Microchip voltage supervisor or operational amplifier. The voltage supervisor monitors a supply rail against a precision threshold using an internal voltage reference and comparator. A programmable delay prevents false resets during supply transients. The open-drain reset output supports wired-OR connection of multiple supervisors. Op-amp variants provide low-input-bias-current CMOS amplification with rail-to-rail output swing for sensor signal conditioning.

Pin Description: MCP100T-315I/TT Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is MCP100T-315I/TT used
  • Power supply monitoring and reset
  • Brownout detection
  • Sensor signal amplification
  • Low-power portable instrumentation
Alternative Models: What chips are recommended as replacements for MCP100T-315I/TT
Model Manufacturer Key Difference
TLC3702 TI Dual comparator, similar function
MAX809 Maxim Voltage supervisor alternative

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1