Opens in a new tab

AT42QT2640-AUR

Capacitive touch controller, 64 channels, QTouch ADC, UART/SPI host

3037

Effective Inventory

Image for reference only

Manufacturer Part:

AT42QT2640-AUR

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

AT42QT2640-AUR is a 24-key QTouch touch controller with I2C/SPI interface, spread spectrum for EMI, QFN-28 package.

Key Specifications

Function QTouch touch controller
Keys 24
Interface I2C / SPI
Supply Voltage 1.62V to 3.6V
Sensing Method Projected capacitive
Package QFN-28
Features Spread spectrum, auto-calibration

Features

  • 24-key projected capacitive touch
  • I2C and SPI interface support
  • Spread spectrum for EMI reduction
  • Auto-calibration and drift compensation
  • Low power mode for battery applications

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: AT42QT2640-AUR Product Introduction

AT42QT2640-AUR is a 24-key QTouch touch controller with I2C/SPI interface, spread spectrum for EMI, QFN-28 package.

Working Principle: AT42QT2640-AUR Working Principle

The AT42QT2640-AUR is a Microchip/Atmel touch controller or microcontroller. For touch variants, capacitive sensing measures charge transfer between a sense electrode and a reference, detecting finger proximity as a capacitance increase. A sigma-delta CSD (Capacitive Sigma Delta) algorithm converts the capacitance change to a digital count. For MCU variants, an ARM or AVR core executes application firmware with integrated peripherals for GPIO, timers, and communication.

Pin Description: AT42QT2640-AUR Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is AT42QT2640-AUR used
  • Capacitive touch user interfaces
  • Consumer appliance controls
  • Industrial HMI panels
  • Access control and security
Alternative Models: What chips are recommended as replacements for AT42QT2640-AUR
Model Manufacturer Key Difference
TLC3702 TI Dual comparator, similar function
MAX809 Maxim Voltage supervisor alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1