Opens in a new tab

LM2670SX-ADJ/NOPB

Step-down converter, 1A, SIMPLE SWITCHER, 8-40V input, 260kHz

11386

Effective Inventory

{"AIGC":{"Label":1,"ContentProducer":"001191350200MA31G8XQ5H10000","ProduceID":"37607055126407304","ContentPropagator":"001191350200MA31G8XQ5H20000","PropagateID":"37607055126407304"}}

Image for reference only

Manufacturer Part:

LM2670SX-ADJ/NOPB

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

LM2670SX-ADJ is a 3A step-down switching voltage regulator with adjustable output, 260kHz switching frequency, TO-263 package.

Key Specifications

Output Current 3 A
Output Voltage 1.2V to 37V adjustable
Input Voltage 4.5V to 40V
Switching Frequency 260 kHz
Efficiency Up to 92%
Package TO-263 (D²PAK)

Features

  • 3A high output current
  • Adjustable output 1.2V to 37V
  • 260kHz switching frequency
  • Efficiency up to 92%
  • TO-263 surface-mount package

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: LM2670SX-ADJ/NOPB Product Introduction

LM2670SX-ADJ is a 3A step-down switching voltage regulator with adjustable output, 260kHz switching frequency, TO-263 package.

Working Principle: LM2670SX-ADJ/NOPB Working Principle

The LM2670SX-ADJ/NOPB is a Texas Instruments interface or analog IC providing signal conditioning, level translation, or protocol conversion between system domains. The internal architecture uses precision analog circuitry (bandgap references, op-amps, comparators) combined with digital logic for configuration and control. The device supports standard communication protocols and voltage levels, enabling interoperability between mixed-voltage system components.

Pin Description: LM2670SX-ADJ/NOPB Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is LM2670SX-ADJ/NOPB used
  • Multi-voltage I2C/SPI bus extension
  • Sensor signal conditioning
  • Protocol conversion
  • Hot-swap and power sequencing
Alternative Models: What chips are recommended as replacements for LM2670SX-ADJ/NOPB
Model Manufacturer Key Difference
NCV4275 ON Semi Equivalent LDO function
AP2112 Diodes Inc Low-cost LDO alternative

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1