Opens in a new tab

ADP3330ARTZ-2.5-R7

AnyCAP LDO regulator, 200mA, 2.5V fixed, low-noise, 1.4% accuracy

11933

Effective Inventory

Image for reference only

Manufacturer Part:

ADP3330ARTZ-2.5-R7

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

ADP3330ARTZ-2.5-R7 is a 200mA anyCAP LDO regulator with 2.5V fixed output, 150mV dropout, SOT-23-5 package, tape and reel.

Key Specifications

Output Current 200 mA
Output Voltage 2.5V fixed
Dropout Voltage 150 mV at 200mA
Quiescent Current 70 µA
Input Voltage 2.6V to 12V
Package SOT-23-5
Stability anyCAP (stable with any capacitor)

Features

  • anyCAP architecture – stable with any output capacitor
  • 2.5V precision fixed output
  • 150mV low dropout at 200mA
  • Thermal shutdown and current limit
  • SOT-23-5 with enable pin

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: ADP3330ARTZ-2.5-R7 Product Introduction

ADP3330ARTZ-2.5-R7 is a 200mA anyCAP LDO regulator with 2.5V fixed output, 150mV dropout, SOT-23-5 package, tape and reel.

Working Principle: ADP3330ARTZ-2.5-R7 Working Principle

The ADP3330ARTZ-2.5-R7 is an Analog Devices precision analog IC — either a low-dropout regulator, high-resolution ADC, or precision amplifier. Chopper-stabilized or auto-zero architectures achieve microvolt-level offset drift. A charge-balancing or delta-sigma modulator provides 16-24 bit resolution in ADC variants. Low noise and high PSRR ensure signal integrity in precision measurement chains. The device operates from a single supply with rail-to-rail input/output capability.

Pin Description: ADP3330ARTZ-2.5-R7 Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is ADP3330ARTZ-2.5-R7 used
  • Precision measurement and instrumentation
  • Medical device signal chain
  • Industrial process control
  • Low-noise analog front-end
Alternative Models: What chips are recommended as replacements for ADP3330ARTZ-2.5-R7
Model Manufacturer Key Difference
INA219 TI Current/voltage monitor, I2C interface
MCP3424 Microchip 18-bit ADC with I2C, similar resolution

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1