Opens in a new tab

LM78S40N/NOPB

Switching voltage regulator, 40V, 1.5A, step-up/step-down/inverting

8310

Effective Inventory

Image for reference only

Manufacturer Part:

LM78S40N/NOPB

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

LM78S40N is a switching voltage regulator subsystem with 1.25A switch, 40V breakdown, DIP-16 package for step-up/step-down/inverting.

Key Specifications

Function Switching regulator subsystem
Switch Current 1.25 A
Switch Breakdown 40 V
Switching Frequency Up to 100 kHz
Reference Voltage 1.25V
Package DIP-16
Topologies Step-up, step-down, inverting

Features

  • Versatile switching regulator building block
  • 1.25A internal power switch
  • 40V switch breakdown voltage
  • Supports step-up, step-down, inverting
  • DIP-16 through-hole package

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: LM78S40N/NOPB Product Introduction

LM78S40N is a switching voltage regulator subsystem with 1.25A switch, 40V breakdown, DIP-16 package for step-up/step-down/inverting.

Working Principle: LM78S40N/NOPB Working Principle

The LM78S40N/NOPB is a Texas Instruments interface or analog IC providing signal conditioning, level translation, or protocol conversion between system domains. The internal architecture uses precision analog circuitry (bandgap references, op-amps, comparators) combined with digital logic for configuration and control. The device supports standard communication protocols and voltage levels, enabling interoperability between mixed-voltage system components.

Pin Description: LM78S40N/NOPB Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is LM78S40N/NOPB used
  • Multi-voltage I2C/SPI bus extension
  • Sensor signal conditioning
  • Protocol conversion
  • Hot-swap and power sequencing
Alternative Models: What chips are recommended as replacements for LM78S40N/NOPB
Model Manufacturer Key Difference
NCV4275 ON Semi Equivalent LDO function
AP2112 Diodes Inc Low-cost LDO alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1