Opens in a new tab

Home » Integrated Circuits ICs, Video ICs » EP3C80F484I7N

EP3C80F484I7N

Cyclone III FPGA, 80,256 LEs, M9K RAM, 18×18 multipliers, 484-pin FBGA, I7 (industrial)

10212

Effective Inventory

Image for reference only

Manufacturer Part:

EP3C80F484I7N

Package:

484-pin FBGA

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

EP3C80F484I7N is an Intel/Altera Cyclone III EP3C80 FPGA, 80,256 LEs, 484-pin FBGA, industrial grade, speed grade 7.

Key Specifications

Type Cyclone III FPGA
Logic Elements 80,256 LEs
Embedded RAM 2,949,120 bits
Multipliers 432 (18×18)
Package 484-pin FBGA (F484)
Speed Grade I7 (industrial)
Series EP3C80

Features

  • 80K LE Cyclone III FPGA
  • Industrial temperature range
  • 2.95M bits embedded M9K RAM
  • 484-pin FBGA package

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: EP3C80F484I7N Product Introduction

EP3C80F484I7N is an Intel/Altera Cyclone III EP3C80 FPGA, 80,256 LEs, 484-pin FBGA, industrial grade, speed grade 7.

Working Principle: EP3C80F484I7N Working Principle

The EP3C80F484I7N is a Cyclone III FPGA from Intel/Altera. It uses a lookup table (LUT)-based fabric with configurable logic elements (LEs) that implement combinatorial and sequential logic. Embedded M9K/M4K memory blocks provide on-chip RAM, ROM, and FIFO functions. Dedicated DSP multipliers accelerate arithmetic operations. A programmable interconnect matrix routes signals between logic, memory, and I/O elements. Configuration is loaded from external flash or via JTAG/AS programming. The device supports multiple I/O standards including LVDS, SSTL, and HSTL for interfacing with diverse external devices.

Pin Description: EP3C80F484I7N Pin Definition and Functions
Pin Group Name Description
I/O GPIO Banks Programmable I/O with multiple standard support (LVDS, SSTL, HSTL, LVCMOS)
Power VCCIO, VCCINT, VCCPLL Core, I/O, and PLL supply voltages
Ground GND Ground reference
Config DATA, DCLK, nCSO JTAG/AS/AP configuration interface
Clock CLK, PLL Dedicated clock inputs and PLL feedback
Transceiver TX/RX (if applicable) High-speed serial transceiver lanes
Application Scenarios: In which products and applications is EP3C80F484I7N used
  • Digital signal processing and filtering
  • Custom protocol implementation (UART, SPI, I2C, PCIe)
  • Video and image processing pipelines
  • Motor control and industrial automation
  • Prototyping and glue logic integration
Alternative Models: What chips are recommended as replacements for EP3C80F484I7N
Model Manufacturer Key Difference
XC7K325T Xilinx Kintex-7, 326K LE, Artix-class performance
ECP5-85 Lattice 84K LUT, low-cost mid-range alternative
iCE40HX8K Lattice 8K LUT, ultra-low-cost small form factor

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL41050TA-3E

NVE IL41050TA-3E IsoLoop isolated CAN transceiver, 2.5kVrms isolation, 1Mbps, 16-SOIC

Brand: nve

Package: SOIC-16 NB

IN STOCK: 3150pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4115TRLPBF

IRFS4115TRLPBF – 150V N-Channel HEXFET Power MOSFET, 12.1 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 6965pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMC7101AIM5X/NOPB

Single CMOS RRIO op-amp, 1.4MHz, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 11389pcs

Cargo cycle: 3-7 Days

The minimum order is 1