Opens in a new tab

Home » Integrated Circuits ICs, Video ICs » EP3SE260F1152C4G

EP3SE260F1152C4G

Stratix III FPGA, 260,160 LEs, TriMatrix RAM (M512/M4K/M-RAM), DSP blocks, HSSI

4500

Effective Inventory

Image for reference only

Manufacturer Part:

EP3SE260F1152C4G

Package:

1152-pin FBGA

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

EP3SE260F1152C4G is an Intel/Altera Stratix III EP3SE260 FPGA, 260K LEs, 1152-pin FBGA, commercial grade, speed grade 4.

Key Specifications

Type Stratix III FPGA
Logic Elements 260,160 LEs
Embedded RAM 14,443,264 bits
DSP Blocks 768 (18×18)
Package 1152-pin FBGA (F1152)
Speed Grade 4
Series EP3SE260

Features

  • 260K LE Stratix III FPGA
  • 14.4M bits TriMatrix RAM
  • 768 DSP blocks
  • 1152-pin FBGA package

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: EP3SE260F1152C4G Product Introduction

EP3SE260F1152C4G is an Intel/Altera Stratix III EP3SE260 FPGA, 260K LEs, 1152-pin FBGA, commercial grade, speed grade 4.

Working Principle: EP3SE260F1152C4G Working Principle

The EP3SE260F1152C4G is a Stratix III FPGA from Intel/Altera. It uses a lookup table (LUT)-based fabric with configurable logic elements (LEs) that implement combinatorial and sequential logic. Embedded M9K/M4K memory blocks provide on-chip RAM, ROM, and FIFO functions. Dedicated DSP multipliers accelerate arithmetic operations. A programmable interconnect matrix routes signals between logic, memory, and I/O elements. Configuration is loaded from external flash or via JTAG/AS programming. The device supports multiple I/O standards including LVDS, SSTL, and HSTL for interfacing with diverse external devices.

Pin Description: EP3SE260F1152C4G Pin Definition and Functions
Pin Group Name Description
I/O GPIO Banks Programmable I/O with multiple standard support (LVDS, SSTL, HSTL, LVCMOS)
Power VCCIO, VCCINT, VCCPLL Core, I/O, and PLL supply voltages
Ground GND Ground reference
Config DATA, DCLK, nCSO JTAG/AS/AP configuration interface
Clock CLK, PLL Dedicated clock inputs and PLL feedback
Transceiver TX/RX (if applicable) High-speed serial transceiver lanes
Application Scenarios: In which products and applications is EP3SE260F1152C4G used
  • Digital signal processing and filtering
  • Custom protocol implementation (UART, SPI, I2C, PCIe)
  • Video and image processing pipelines
  • Motor control and industrial automation
  • Prototyping and glue logic integration
Alternative Models: What chips are recommended as replacements for EP3SE260F1152C4G
Model Manufacturer Key Difference
XC7K325T Xilinx Kintex-7, 326K LE, Artix-class performance
ECP5-85 Lattice 84K LUT, low-cost mid-range alternative
iCE40HX8K Lattice 8K LUT, ultra-low-cost small form factor

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1