Opens in a new tab

LY68S6400BAIT

64Mb 1.8V SPI/QPI PSRAM, 133MHz, 8Mx8, self-refresh, DFN-8 (2x3mm)

12430

Effective Inventory

Image for reference only

Manufacturer Part:

LY68S6400BAIT

Package:

DFN-8 (2mm x 3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LY68S6400BAIT is a 64Mb (8M x 8-bit) Serial Pseudo-SRAM (PSRAM) from Lyontek Inc., operating at 1.8V with SPI/QPI interface. It features a clock rate up to 133 MHz (non-page boundary crossing) and 84 MHz (page boundary crossing), with self-managed refresh and software reset. The BAIT variant is packaged in an 8-pin 2mm x 3mm DFN, ideal for space-constrained portable and IoT applications.

Key Specifications

Density 64Mb (8M x 8 bits)
Supply Voltage 1.65V to 1.95V
Interface SPI / QPI (SDR mode)
Max Clock Rate 133 MHz (wrapped), 84 MHz (linear burst crossing)
Page Size 1024 bytes
Burst Mode Linear or 32-byte wrapped
Refresh Self-managed
Standby Current 200 µA max @ 85°C
Operating Current 40 mA max
Operating Temp -40°C to +85°C
Package 8-pin DFN (2mm x 3mm)
Part Status Active

Features

  • 64Mb SPI/QPI Serial Pseudo-SRAM at 1.8V
  • Self-managed refresh — no external DRAM refresh required
  • Clock rate up to 133 MHz (wrapped burst), 84 MHz (linear crossing)
  • Linear burst or 32-byte wrapped burst via toggle command
  • Software reset and built-in voltage sensor
  • 50Ω output drive strength LVCMOS
  • Green / RoHS compliant package

Applications

  • Wearable and IoT devices
  • Portable consumer electronics
  • Smart home appliances
  • AR/VR near-eye displays
  • ESP32 / RP2350 PSRAM expansion
Product Introduction: LY68S6400BAIT Product Introduction

The LY68S6400BAIT is a 64Mb (8M x 8-bit) Serial Pseudo-SRAM from Lyontek Inc. operating at 1.8V with SPI and QPI interfaces. The PSRAM features self-managed refresh, eliminating the need for external DRAM refresh control and simplifying system design. With clock rates up to 133 MHz in wrapped burst mode and 84 MHz in linear burst with page boundary crossing, it delivers high bandwidth for embedded applications. The 8-pin 2mm x 3mm DFN package enables ultra-compact designs in wearable, IoT, and portable consumer electronics.

Working Principle: LY68S6400BAIT Working Principle

The LY68S6400 operates as a serial pseudo-SRAM using an internal DRAM array with integrated refresh management. The host accesses the memory through SPI or QPI commands. In SPI mode, data is transferred serially via SI/SIO[0] and SO/SIO[1]. In QPI mode, all four data lines SIO[0:3] transfer data simultaneously for 4x bandwidth. An internal refresh controller autonomously refreshes the DRAM cells, making the device appear as SRAM to the host. Linear burst mode allows continuous reads across page boundaries at up to 84 MHz, while wrapped burst reaches 133 MHz. Software reset restores the device to its default state.

Pin Description: LY68S6400BAIT Pin Definition and Functions
Pin Name Type Function
1 CE# Input Chip select, active low
2 SO/SIO[1] I/O Serial output / Quad data[1]
3 SIO[2] I/O Quad data[2] / WP#
4 VSS Power Ground
5 SI/SIO[0] I/O Serial input / Quad data[0]
6 SCLK Input Clock signal
7 SIO[3] I/O Quad data[3] / HOLD#
8 VCC Power 1.8V supply
Application Scenarios: In which products and applications is LY68S6400BAIT used
  • ESP32 / ESP32-S3 / RP2350 external PSRAM for Wi-Fi buffering
  • Wearable device display frame buffer
  • IoT sensor data logging with low standby power
  • AR/VR near-eye display frame storage
Alternative Models: What chips are recommended as replacements for LY68S6400BAIT
Manufacturer Part Number Package Notes
Lyontek LY68L6400SLIT SOP-8 3.3V variant, same 64Mb
APMemory APS6404L-3SQR-SN SOP-8 Drop-in 64Mb 3.3V replacement
IPUS IPS6404LSQ SOP-8 64Mb 3.3V alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1