Opens in a new tab

Home » Integrated Circuits ICs » MX60LF8G28AD-TI

MX60LF8G28AD-TI

8Gb SLC NAND Flash, 3V, ONFI 1.0, 4K+256B page, 60K P/E cycles, 48-TSOP Industrial

7823

Effective Inventory

Image for reference only

Manufacturer Part:

MX60LF8G28AD-TI

Package:

48-TSOP(I) (12mm x 20mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MX60LF8G28AD-TI is an 8Gb SLC (Single-Level Cell) NAND Flash Memory device from Macronix (MXIC). It is a 3V parallel NAND flash stacked from two 4Gb die, each with two planes of 1024 blocks. The device features a (4096+256)-byte page size, (256K+16K)-byte block size, ONFI 1.0 compliant interface, and supports Cache Read/Cache Program operations. The -TI suffix denotes the 48-TSOP(I) industrial-grade package with an operating temperature range of -40°C to +85°C. With a typical P/E endurance of 60K cycles (with 8-bit ECC per 544 bytes), it is well-suited for embedded system code and data storage.

Key Specifications

Manufacturer Macronix (MXIC)
Density 8Gb (1G x 8)
Cell Type SLC (Single-Level Cell)
Voltage (VCC) 2.7V – 3.6V
Bus Width x8
Interface Parallel, ONFI 1.0 Compliant
Page Size (4096 + 256) bytes
Block Size (256K + 16K) bytes = 64 pages per block
Plane Size 2 planes per die, 1024 blocks per plane
Die Stack 2 x 4Gb die
ECC Requirement 8-bit ECC per (512+32) bytes
Random Read Access (tR) 25 us (typ.)
Sequential Read Speed 20 ns per byte
Page Program Time 320 us (typ.), 700 us (max)
Cache Read Busy Time 4.5 us (typ.)
Cache Program Busy Time 5 us (typ.)
Block Erase Time 4 ms (typ.), 6 ms (max)
Active Current (Read/Program/Erase) 30 mA (max)
Standby Current (CMOS) 100 uA (max)
Endurance 60,000 P/E cycles (typ.)
Data Retention 10 years
Operating Temperature -40°C to +85°C (Industrial)
Guaranteed Good Blocks Block #0 – #7 at shipping
Secure OTP 30 pages
Unique ID ONFI standard (PUF-like)
Randomizer Supported (Set Feature command)
Special Read for Data Recovery Supported
Interleaved Die Operation Supported
Chip Enable Don’t Care Supported
Package 48-TSOP(I), 12mm x 20mm
RoHS / Halogen-Free Yes

Features

  • 8Gb SLC NAND Flash with high reliability (60K P/E cycles typical)
  • Two 4Gb die stacked with interleaved die operation support
  • ONFI 1.0 compliant parallel interface with command/address/data multiplexing
  • Cache Read and Cache Program for improved throughput
  • Integrated randomizer and special read for data recovery
  • PUF-like Unique ID (ONFI standard) for device authentication
  • Secure One-Time Programmable (OTP) area: 30 pages
  • 8 guaranteed good blocks (Block #0-#7) at factory shipment
  • Hardware write protection via WP# pin
  • Chip Enable Don’t Care for simplified system interface
  • Single 3V supply (2.7V-3.6V) with low 30mA active / 100uA standby current
  • Industrial temperature range: -40°C to +85°C

Applications

  • Embedded system code and data storage (set-top boxes, TVs, industrial controllers)
  • Consumer electronics (digital cameras, printers, networking devices)
  • Industrial control systems requiring high reliability NAND storage
  • Automotive infotainment and telematics (with external ECC)
  • Boot code storage in embedded Linux / RTOS platforms
Product Introduction: MX60LF8G28AD-TI Product Introduction

The MX60LF8G28AD-TI is an 8Gb SLC NAND Flash Memory device from Macronix, belonging to the MX60LF 3V family. It is stacked from two 4Gb die, each organized with two planes of 1024 blocks, where each block contains 64 pages of (4096+256) bytes. The device supports the ONFI 1.0 standard interface with command/address/data multiplexing on an 8-bit bus. Key features include Cache Read/Cache Program for throughput improvement, interleaved die operation, a hardware randomizer, special read for data recovery, PUF-like Unique ID, and 30-page Secure OTP. With a typical P/E endurance of 60K cycles (requiring 8-bit ECC per 544 bytes) and 10-year data retention, the MX60LF8G28AD-TI is ideal for embedded system code and data storage in industrial and consumer applications. The -TI suffix denotes the 48-TSOP(I) industrial-grade package.

Working Principle: MX60LF8G28AD-TI Working Principle

The MX60LF8G28AD-TI operates as a parallel SLC NAND Flash memory with an ONFI 1.0 compliant interface. Commands, addresses, and data are multiplexed through the 8-bit I/O[7:0] bus, controlled by CLE (Command Latch Enable), ALE (Address Latch Enable), CE# (Chip Enable), WE# (Write Enable), RE# (Read Enable), and WP# (Write Protect) signals. Read operations: A Read command (00h-30h) initiates page transfer from the NAND array to the page buffer (tR = 25us typical), after which data is output sequentially at 20ns per byte on RE# falling edges. Cache Read allows overlapping array-to-buffer transfer of the next page while the current page is being output. Program operations: A Page Program command (80h-10h) loads data from I/O into the page buffer and programs the selected page (320us typical). Cache Program (80h-15h) allows pipelined programming across pages. Erase operations: A Block Erase command (60h-D0h) erases a 256K+16K byte block in 4ms typical. The two stacked 4Gb die support interleaved operations for improved performance. The on-chip randomizer (enabled via Set Feature) scrambles data to mitigate program disturb. The R/B# open-drain output indicates device busy/ready status.

Pin Description: MX60LF8G28AD-TI Pin Definition and Functions
Pin Name Type Function
1 CE# Input Chip Enable (active low); high = standby, low = active
2-8, 30-36 I/O[7:0] I/O Multiplexed command/address/data bus
9 WP# Input Write Protect (active low); low = block program/erase disable
10 ALE Input Address Latch Enable; high = address on I/O at WE# rising
11 CLE Input Command Latch Enable; high = command on I/O at WE# rising
12 WE# Input Write Enable; address/data/command latched at WE# rising edge
13 RE# Input Read Enable; data output tREA after RE# falling edge
14-22 VCC Power 2.7V – 3.6V supply voltage
23-29, 37-48 VSS Ground Ground connection
R/B# R/B# Output (OD) Ready/Busy status (open-drain); low = busy, high = ready
Application Scenarios: In which products and applications is MX60LF8G28AD-TI used
  • Embedded Linux / RTOS boot code and root filesystem storage in set-top boxes, smart TVs, and IoT gateways
  • Industrial control system program and data logging with high reliability SLC endurance (60K P/E cycles)
  • Consumer electronics mass storage: digital cameras, printers, networking routers
  • Automotive infotainment head units and telematics modules (with host-side 8-bit ECC)
  • FPGA / SoC boot media in embedded platforms requiring ONFI-compliant raw NAND
Alternative Models: What chips are recommended as replacements for MX60LF8G28AD-TI
Manufacturer Part Number Package Notes
Macronix MX60LF8G18AC 48-TSOP / 63-VFBGA 8Gb SLC, 2K page, 4-bit ECC, 100K cycles (predecessor)
Macronix MX60LF8G28AB 48-TSOP / 63-VFBGA 8Gb SLC, 2K page, 8-bit ECC, no randomizer
Macronix MX30LF4G28AD 48-TSOP / 63-VFBGA 4Gb SLC, 4K page, 8-bit ECC, same AD family
Winbond W25N01GV 8-SOIC / WSON 1Gb SLC NAND, SPI interface alternative
Micron MT29F8G08ABACAH4 48-TSOP 8Gb SLC NAND, ONFI 2.1 compatible

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL41050TA-3E

NVE IL41050TA-3E IsoLoop isolated CAN transceiver, 2.5kVrms isolation, 1Mbps, 16-SOIC

Brand: nve

Package: SOIC-16 NB

IN STOCK: 3150pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4115TRLPBF

IRFS4115TRLPBF – 150V N-Channel HEXFET Power MOSFET, 12.1 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 6965pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MX29LV800CBTI-70G

8Mbit Parallel NOR Flash, Bottom Boot, 70ns, 2.7-3.6V, 48-TSOP

Brand: Macronix

Package: 48-TSOP

IN STOCK: 9345pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMC7101AIM5X/NOPB

Single CMOS RRIO op-amp, 1.4MHz, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 11389pcs

Cargo cycle: 3-7 Days

The minimum order is 1