Opens in a new tab

Home » Integrated Circuits ICs » SD68C128TJ-15

SD68C128TJ-15

High-voltage phototransistor optocoupler, 80V VCEO, 150% CTR min, 5000V isolation, SOP-5 package

3456

Effective Inventory

Image for reference only

Manufacturer Part:

SD68C128TJ-15

Package:

SOP-5

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SD68C128TJ-15 is a high-speed phototransistor optocoupler with a collector-emitter voltage rating of 80V, designed for high-voltage isolation and signal transmission applications. This device features an infrared LED input optically coupled to a high-voltage silicon phototransistor, packaged in a compact SOP-5 surface-mount package. The 150% minimum current transfer ratio (CTR) ensures reliable signal detection across a wide operating temperature range. It is commonly used in switch-mode power supplies, industrial control systems, and high-voltage sensing circuits requiring both high isolation voltage and high output voltage capability.

Key Specifications

Type High-Voltage Phototransistor Optocoupler
Input Side GaAs Infrared LED
Output Side High-Voltage NPN Phototransistor
Isolation Voltage (VISO) 5000 Vrms (1 min)
Current Transfer Ratio (CTR) 150% min at IF=5mA, VCE=5V
Collector-Emitter Voltage (VCEO) 80 V min
Collector-Base Voltage (VCBO) 110 V min
Emitter-Collector Voltage (VECO) 7 V
Saturation Voltage (VCE(sat)) 0.3 V max at IF=8mA, IC=2.4mA
Switching Time (tr/tf) 5µs / 10µs typical
Package SOP-5 (Surface Mount)
Operating Temperature -55°C ~ +110°C

Features

  • High collector-emitter voltage: 80V
  • 5000Vrms electrical isolation
  • High CTR: 150% minimum
  • Compact SOP-5 surface-mount package
  • Low saturation voltage
  • UL1577 and VDE approved
  • RoHS compliant and halogen-free
  • Enhanced CTR linearity over temperature
  • Creepage distance > 7mm
  • High insulation reliability

Applications

  • High-voltage switch-mode power supplies
  • Offline flyback converter feedback
  • High-voltage sensing and monitoring
  • Industrial control system isolation
  • Programmable logic controllers
  • Solid state relays
  • Telecom power systems
  • Medical equipment isolation
Product Introduction: SD68C128TJ-15 Product Introduction

The SD68C128TJ-15 is a high-voltage phototransistor optocoupler designed for applications requiring both robust electrical isolation and high output voltage capability. With an 80V collector-emitter voltage rating — significantly higher than standard 35V optocouplers — this device is particularly suited for high-voltage power supply feedback circuits and industrial control applications where the output must interface with higher voltage rails. The SOP-5 surface-mount package provides a compact form factor with creepage and clearance distances exceeding 7mm, ensuring compliance with stringent safety standards. The CTR (Current Transfer Ratio) is specified at a minimum of 150% under standard test conditions (IF=5mA, VCE=5V), providing high sensitivity for low-power drive applications. The infrared LED input and silicon phototransistor output are separated by an insulating barrier providing 5000Vrms isolation voltage for 1 minute. The device operates reliably over a -55°C to +110°C temperature range with stable CTR characteristics. It is commonly used in offline flyback converters, high-voltage sensing circuits, industrial I/O modules, and any application requiring galvanic isolation with elevated output voltage capability.

Working Principle: SD68C128TJ-15 Working Principle

The SD68C128TJ-15 operates on the principle of optical coupling for electrical isolation between input and output circuits. The input side consists of a gallium arsenide infrared light-emitting diode (LED) that emits infrared light when forward-biased with a drive current IF. This light is transmitted across a transparent insulating dielectric material (typically polyimide or epoxy) that provides the high-voltage isolation barrier (5000Vrms). On the output side, a high-voltage silicon NPN phototransistor absorbs the incident photons in its base-collector junction, generating a photocurrent that serves as the base drive current for the transistor. The resulting collector current (IC) is proportional to the LED current multiplied by the current transfer ratio (CTR = IC/IF × 100%). The high-voltage phototransistor (80V VCEO) is fabricated using a process optimized for high breakdown voltage while maintaining good current gain. In switching applications, when the LED current is sufficient, the phototransistor saturates at VCE(sat) ≤ 0.3V; when the LED current is removed, the transistor turns off and can withstand up to 80V between collector and emitter. This high voltage rating makes it suitable for direct connection to higher voltage buses (e.g., 48V telecom rails) without additional level shifting. The isolation between input and output is achieved through the physical separation of LED and phototransistor, with no metallic path between them, ensuring complete galvanic isolation for safety and noise immunity.

Pin Description: SD68C128TJ-15 Pin Definition and Functions
Pin Number Pin Name Type Description
1 Anode Input LED anode terminal
2 Cathode Input LED cathode terminal
3 N.C. – No connection (or N.C. pin)
4 Collector Output Phototransistor collector
5 Emitter Output Phototransistor emitter
Application Scenarios: In which products and applications is SD68C128TJ-15 used
  • Offline flyback and forward converter feedback
  • 48V telecom power supply isolation
  • High-voltage battery monitoring
  • Industrial PLC input/output modules
  • Solid state relay output stages
  • Telecom line card power isolation
  • Medical device patient protection
  • High-voltage gate drive feedback
Alternative Models: What chips are recommended as replacements for SD68C128TJ-15
Manufacturer Part Number Description
Vishay VO619A-4 80V VCEO phototransistor optocoupler, SMD-4
Everlight EL357N-C Phototransistor optocoupler, 35V, SOP-4
ON Semiconductor FODM8801C High temp phototransistor optocoupler, MFP4
Lite-On LTV-817-C Phototransistor optocoupler, 35V, DIP-4

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1