Opens in a new tab

Home » Integrated Circuits ICs » EN27C010-70P

EN27C010-70P

1Mbit UV EPROM, 128KB x 8, 70ns access, 5V, 32-CDIP ceramic with quartz window

8509

Effective Inventory

Image for reference only

Manufacturer Part:

EN27C010-70P

Package:

32-CDIP (windowed)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EN27C010-70P is a 1Mbit (128K x 8) UV-erasable EPROM (Erasable Programmable Read-Only Memory) manufactured by Eon Silicon Solution. This non-volatile memory device features 70ns access time and is organized as 131,072 words of 8 bits each. Data is stored by injecting charge onto floating gates using Fowler-Nordheim tunneling, and can be erased by exposure to ultraviolet (UV) light through the quartz window on the package. The 70P suffix indicates 70ns access speed in a 32-pin ceramic DIP package with quartz window for UV erasure.

Key Specifications

r>

Type UV-Erasable EPROM
Memory Size 1 Mbit (131,072 x 8 bits)
Access Time 70 ns (max)
Supply Voltage 5.0V ± 10% (read)
Programming Voltage 12.5V (VPP)
Operating Current 40 mA max (active)
Standby Current 100 µA max (CMOS standby)
Output Type TTL-compatible, tri-state
Endurance 100 program/erase cycles minimum
Data Retention 10 years minimum
Package 32-Pin Ceramic DIP (CDIP) with quartz window
Operating Temperature 0°C ~ +70°C (Commercial)

Features

  • 1Mbit UV-erasable EPROM (128KB x 8)
  • Fast access time: 70ns
  • 5V single supply for read operation
  • 12.5V programming voltage
  • CMOS technology — low power
  • Two-line control (OE#, CE#) for easy interfacing
  • Tri-state outputs
  • JEDEC standard pinout and programming
  • Quartz window for UV erasure
  • 100 erase/program cycles
  • 10-year data retention
  • Direct replacement for 27C010 series

Applications

  • Firmware storage for embedded systems
  • Microprocessor program memory
  • BIOS and boot code storage
  • Industrial control systems
  • Telecom equipment configuration
  • Medical device firmware
  • Gaming machines
  • Aerospace and military systems
Product Introduction: EN27C010-70P Product Introduction

The EN27C010-70P is a 1 megabit UV-erasable electrically programmable read-only memory (EPROM) from Eon Silicon Solution. Organized as 131,072 bytes (128KB) of 8-bit data with 70ns maximum access time, it provides fast, non-volatile program storage for embedded systems. The device is manufactured using CMOS technology, offering low power consumption with 40mA maximum active current and 100µA standby current. The 32-pin ceramic DIP package with quartz window allows the memory to be erased by exposure to short-wave ultraviolet light (2537Å wavelength), enabling repeated programming and erasure cycles — typically at least 100 cycles. Programming is performed by applying 12.5V to the VPP pin along with proper address and data signals, using industry-standard EPROM programming algorithms compatible with standard device programmers. The device operates from a single 5V supply during read operations, with TTL-compatible tri-state outputs that simplify bus-oriented system design. The JEDEC-standard pinout ensures compatibility with other 27C010-series devices, making the EN27C010 a drop-in replacement. Data retention is guaranteed for a minimum of 10 years. The EN27C010-70P is suitable for applications requiring non-volatile program storage, including embedded system firmware, BIOS code, microcontroller program memory, industrial control systems, telecom equipment, medical devices, and aerospace systems where the ability to reprogram in development or field maintenance is required.

Working Principle: EN27C010-70P Working Principle

The EN27C010 EPROM stores data using floating gate transistor technology, where each memory cell contains a MOSFET with an additional ‘floating gate’ surrounded by insulating oxide. In the erased state, the floating gate has no stored charge, and the transistor conducts normally when its control gate is driven — this represents a logic ‘1’ (EPROMs typically read as all 1s after erasure). Programming the device involves applying elevated voltages (12.5V on VPP, 5V on VCC) to selected memory cells. The high voltage across the thin oxide between the drain and floating gate causes electrons to tunnel through the oxide (Fowler-Nordheim tunneling) and become trapped on the floating gate. These trapped electrons create a negative charge that raises the transistor’s threshold voltage, preventing it from turning on during normal read operation — this represents a logic ‘0’. Because the floating gate is surrounded by high-quality oxide, the trapped electrons remain for years (10+ years data retention) even with power removed. Erasure is accomplished by exposing the chip to ultraviolet light through the quartz window on the package. The UV photons provide enough energy for the trapped electrons to overcome the oxide barrier and return to the substrate, restoring the cell to its erased (all 1s) state. During normal read operation, a 17-bit address on pins A0-A16 selects one of the 131,072 bytes. The chip enable (CE#) and output enable (OE#) pins control device selection and output driving, respectively. When CE# is high, the device enters standby mode with significantly reduced power consumption. The tri-state outputs can be placed in high-impedance mode for connection to shared data buses.

Pin Description: EN27C010-70P Pin Definition and Functions
Pin Number Pin Name Type Description
1-10 A0-A9 Input Address lines 0 through 9
11-13 A10-A12 Input Address lines 10 through 12
14 GND Power Ground (0V)
15-19 A13-A16, A11 Input Address lines (A13, A14, A15, A16, A11)
20 CE#/PGM# Input Chip Enable / Program Pulse (active low)
21 A10 Input Address line 10 (alternate pin)
22-29 O0-O7 Output Data outputs 0 through 7
30 OE#/VPP Input Output Enable (read) / Program Voltage (program mode)
31 A9 Input Address line 9 (alternate pin)
32 VCC Power Power supply (+5V)
Note: Pinout follows JEDEC standard 27C010 32-pin DIP assignment.
Application Scenarios: In which products and applications is EN27C010-70P used
  • Embedded system firmware storage
  • Microprocessor program memory
  • PC BIOS and boot code
  • Industrial PLC program storage
  • Telecom equipment configuration memory
  • Medical device control firmware
  • Arcade/game machine program ROMs
  • Avionics and military equipment
Alternative Models: What chips are recommended as replacements for EN27C010-70P
Manufacturer Part Number Description
Microchip/Microsemi 27C010-70/JI 1Mbit UV EPROM, 70ns, 32-CDIP
Macronix MX27C1000DC-70 1Mbit EPROM, 70ns, 32-CDIP
Winbond W27C010 1Mbit EEPROM, 70ns, 32-DIP
AMD AM27C010-70 1Mbit UV EPROM, 70ns, ceramic DIP

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1