Opens in a new tab

Home » Integrated Circuits ICs » M29W800DT-70N6

M29W800DT-70N6

8Mbit 3V Flash, x8/x16, top boot, 70ns, 48-TSOP, industrial temperature, ST

7038

Effective Inventory

Image for reference only

Manufacturer Part:

M29W800DT-70N6

Package:

48-TSOP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The M29W800DT-70N6 is an 8Mbit (1MB) 3V NOR Flash memory from STMicroelectronics with top boot block architecture and 70ns access time. The ‘DT’ designation indicates dual organization (x8/x16) with top boot block placement — the boot and parameter blocks are located at the high (top) address range rather than the bottom. This top boot configuration is preferred by certain processor architectures (such as PowerPC and some ARM cores) that start execution from the high address space after reset.

Key Specifications

Type 3V Dual-Org Top Boot NOR Flash Memory
Memory Size 8 Mbit (1MB / 512KW x 16 / 1MB x 8)
Organization x8 / x16 (selectable via BYTE#)
Access Time 70 ns (max)
Supply Voltage 2.7V ~ 3.6V (3V nominal)
Architecture Top Boot Block
Block Organization 15×64KB + 1×32KB + 2×8KB + 1×16KB
Program Mode Word/byte / Write to Buffer (32-word)
Endurance 100,000 program/erase cycles
Data Retention 10 years minimum
Package 48-Pin TSOP (Type N)
Operating Temperature -40°C ~ +85°C (Industrial)

Features

  • Dual x8/x16 organization via BYTE# pin
  • Top boot block architecture
  • 8Mbit density, 70ns fast access
  • Single 2.7V-3.6V supply for all operations
  • Write to Buffer for fast programming
  • Program Suspend and Resume
  • Erase Suspend and Resume
  • Hardware block protection
  • Status register with Data Polling/Toggle Bit
  • JEDEC standard command interface
  • Low power active and standby
  • Industrial temperature range
  • RoHS compliant 48-TSOP package

Applications

  • PowerPC and top-boot processor systems
  • Networking and telecom equipment
  • Industrial automation controllers
  • High-end embedded systems
  • Automotive electronics
  • Medical diagnostic equipment
  • Test and measurement instruments
  • Aerospace and defense systems
Product Introduction: M29W800DT-70N6 Product Introduction

The M29W800DT-70N6 is an 8 megabit 3V dual-organization top-boot NOR Flash memory from STMicroelectronics. The ‘DT’ designation indicates dual (x8/x16) organization with top boot block architecture — the boot and parameter blocks are located at the highest (top) address range, as opposed to bottom boot devices where they are at the lowest addresses. This top boot configuration is preferred by certain processor architectures (e.g., PowerPC, MIPS, some ARM implementations) that start code execution from the upper address range after power-on reset. The device can be configured as 512K words of 16 bits (x16 mode, BYTE# high) or 1M bytes of 8 bits (x8 mode, BYTE# low), providing design flexibility for different bus widths. The block organization consists of fifteen 64KB main blocks, one 32KB block, two 8KB parameter blocks, and one 16KB boot block — all at the top of the address map. With 70ns access time, it supports fast execute-in-place (XIP) operation. The device operates from a single 2.7V to 3.6V supply for all operations, with on-chip charge pumps generating program and erase voltages. Advanced features include Write to Buffer, Program/Erase Suspend/Resume, status register monitoring, and hardware block protection. Packaged in a 48-pin TSOP Type N surface-mount package and fully specified for -40°C to +85°C industrial operation, the M29W800DT-70N6 is ideal for PowerPC-based systems, networking equipment, industrial controllers, and high-end embedded applications requiring top boot Flash memory.

Working Principle: M29W800DT-70N6 Working Principle

The M29W800DT is a top-boot dual-organization NOR Flash memory. The ‘top boot’ architecture means the boot block (containing system initialization code) and parameter blocks are located at the highest addresses in the memory map, rather than at the bottom (lowest addresses). This is important because different processor architectures have different reset vector locations — some start executing at address 0 (bottom boot), while others start at the top of the address space (top boot). PowerPC, MIPS, and many 32-bit RISC processors typically use top boot address maps. The dual organization (x8/x16) allows the same memory chip to interface with either 8-bit or 16-bit data buses, selected by the BYTE# pin. In x16 mode, 16 data bits are read/written per access; in x8 mode, only 8 bits are used, with the A-1 address pin selecting which byte of each 16-bit word is accessed. NOR Flash provides random read access — applying an address latches data on the output pins after the 70ns access time. This enables execute-in-place (XIP) operation where the processor fetches instructions directly from Flash without needing to copy code to RAM first. Program and erase operations are initiated by writing command sequences to the device. The internal state machine then handles the operation automatically. Write to Buffer allows loading up to 32 words/bytes into a buffer before programming, which is much faster than programming each location individually. Program/Erase Suspend allows pausing an operation to perform reads in other blocks, then resuming. This is valuable for systems that need periodic access to Flash data even during firmware updates. Block protection can lock specified blocks (typically the boot block) to prevent accidental erasure or programming, ensuring the system can always boot even if something goes wrong during firmware update.

Pin Description: M29W800DT-70N6 Pin Definition and Functions
Pin Number Pin Name Type Description
1 A19 / A-1 Input Address 19 (x16) / Addr -1 (x8 byte mode)
2-12 A10-A0 Input Address lines 0 through 10
13-19 DQ0-DQ6 I/O Data input/output 0 through 6
20 GND Power Ground (0V)
21-27 DQ7-DQ13 I/O Data input/output 7 through 13
28 DQ14 I/O Data input/output 14
29 RP# Input Reset / Power-down (active low)
30 OE# Input Output Enable (active low)
31-32 A11, A12 Input Address lines 11, 12
33-41 A13-A18, A19 Input Address lines 13 through 19
42 CE# Input Chip Enable (active low)
43 WE# Input Write Enable (active low)
44 BYTE# Input Byte/Word mode select
45-48 VCC, DQ15 Power/I/O Power supply, Data line 15
Note: 48-TSOP Type N pinout; exact per datasheet.
Application Scenarios: In which products and applications is M29W800DT-70N6 used
  • PowerPC and RISC processor systems
  • Network routers and switches
  • Telecom base station controllers
  • Industrial PLC and CNC systems
  • High-performance embedded systems
  • Automotive control units
  • Medical imaging equipment
  • Aerospace and defense electronics
Alternative Models: What chips are recommended as replacements for M29W800DT-70N6
Manufacturer Part Number Description
STMicroelectronics M29W800DB-70N6 8Mbit 3V Flash, bottom boot, 48-TSOP
Spansion S29GL064N90TFI020 64Mbit x16 Flash, top boot, TSOP
Micron MT28EL08HQ-85 8Mbit 3V Flash, x16, TSOP
ISSI IS29GL064T 64Mbit 3V Flash, top boot

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1