Opens in a new tab

Home » Capacitors, Passive Components » CC0201KRX7R6BB222

CC0201KRX7R6BB222

Yageo CC series X7R MLCC, 2.2nF ±10%, 10V DC, Class 2 general-purpose, ultra-small 0201 package, -55°C to +125°C

12933

Effective Inventory

Image for reference only

Manufacturer Part:

CC0201KRX7R6BB222

Package:

0201 (0603 Metric)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CC0201KRX7R6BB222 is a general-purpose Class 2 multilayer ceramic capacitor (MLCC) from Yageo’s CC series, offering 2.2nF capacitance with ±10% tolerance and X7R dielectric in an ultra-compact 0201 (0603 Metric) surface-mount package. With a 10V DC voltage rating and -55°C to +125°C operating temperature range, this miniature capacitor is designed for space-constrained consumer electronics, mobile devices, and high-density PCB assemblies where board real estate is at a premium.

Key Specifications

Capacitance 2.2nF (2200pF, 222)
Tolerance ±10% (K)
Rated Voltage 10V DC
Dielectric X7R — EIA Class 2
Temperature Characteristic ±15% over -55°C to +125°C
Package / Case 0201 (0603 Metric)
Dimensions (L × W × T) 0.6mm × 0.3mm × 0.3mm
Operating Temperature -55°C to +125°C
Dissipation Factor ≤ 5% (120Hz, 25°C)
Insulation Resistance ≥ 100GΩ or 100s/MΩ (min)
Aging Rate ~1% per decade (typical X7R)
Moisture Sensitivity MSL 1 (Unlimited)
Termination Wraparound, Ni-barrier, Sn-plated
Packaging 7″ Reel, Paper Tape (15,000 pcs/reel)
Standards RoHS Compliant, Halogen Free

Features

  • Ultra-compact 0201 (0603 Metric) package for maximum space savings
  • X7R Class 2 dielectric — good capacitance density
  • 2.2nF at 10V in 0201 footprint — high volumetric efficiency
  • Wide operating temperature range: -55°C to +125°C
  • ±10% tolerance suitable for general-purpose decoupling
  • Nickel-barrier termination with matte tin plating
  • MSL Level 1 — no dry bake required before assembly
  • RoHS compliant and halogen-free
  • High-volume tape and reel packaging (15,000 pcs/reel)
  • Cost-effective for consumer and portable electronics

Applications

  • Mobile phones and smartphones — high-density decoupling
  • Wearable devices and smartwatches
  • Portable consumer electronics and IoT devices
  • Power supply decoupling and bulk capacitance
  • Signal filtering and noise suppression
  • Digital logic IC bypass capacitors
  • Tablets, laptops, and ultrabooks
  • Bluetooth and Wi-Fi modules
  • Sensor circuits and analog front-ends
Product Introduction: CC0201KRX7R6BB222 Product Introduction

The CC0201KRX7R6BB222 is a 2.2nF X7R dielectric multilayer ceramic capacitor from Yageo’s CC series, housed in the ultra-compact 0201 (0603 Metric) surface-mount package. Measuring just 0.6mm × 0.3mm × 0.3mm, this tiny MLCC delivers significant capacitance density — 2.2 nanofarads at 10V in one of the smallest standard SMT packages available — making it ideal for the most space-constrained electronic designs.

The X7R dielectric used in this capacitor is an EIA Class 2 material, meaning it provides high capacitance per unit volume (volumetric efficiency) at the cost of some capacitance variation with temperature, voltage, and time. X7R specifies that capacitance changes by no more than ±15% over the -55°C to +125°C operating temperature range (relative to 25°C). The K tolerance code indicates ±10% initial capacitance tolerance at room temperature.

X7R capacitors exhibit an aging effect — a gradual decrease in capacitance over time due to gradual reordering of the ferroelectric domains in the ceramic material. The aging rate for X7R is typically about 1% per decade hour, meaning after 1,000 hours the capacitance may decrease by approximately 3%. This aging is recoverable by subjecting the capacitor to temperatures above its Curie temperature (around 125°C), which effectively “resets” the aging clock.

The CC series from Yageo features base metal electrode (BME) technology with nickel internal electrodes and a nickel-barrier external termination system with tin plating. This construction provides excellent solderability and reliability while meeting all current RoHS and halogen-free environmental requirements. The wraparound termination design ensures robust mechanical and electrical connection to the PCB.

Supplied on 7-inch paper tape reels (code R suffix) with 15,000 pieces per reel, the CC0201KRX7R6BB222 is optimized for high-speed, high-volume SMT assembly lines. With MSL Level 1 classification, no dry packing or bake-out is required before use, simplifying inventory management and reducing manufacturing overhead.

These tiny capacitors find widespread use in mobile phones, wearables, IoT devices, and any application where PCB space is at a premium and high-density decoupling, filtering, or signal conditioning is needed.

Working Principle: CC0201KRX7R6BB222 Working Principle

An X7R multilayer ceramic capacitor stores electrical energy through the polarization of ferroelectric ceramic material between interleaved conductive electrodes. The “X7R” designation specifies its temperature characteristic: X = -55°C minimum, 7 = +125°C maximum, R = ±15% capacitance change over that range.

In the CC0201KRX7R6BB222, the capacitor is constructed from many thin layers of X7R ceramic dielectric interleaved with internal metal electrodes. X7R is a Class 2 dielectric based on barium titanate (BaTiO3) with carefully formulated dopants and modifiers that shift the Curie temperature (the temperature of maximum capacitance) and broaden the capacitance-temperature curve to achieve the ±15% tolerance specification over the full -55°C to +125°C range.

The fabrication process begins with ceramic “green tape” — thin, flexible sheets of ceramic powder mixed with organic binders and solvents. Internal electrodes (typically nickel for base metal electrode technology) are printed onto the green tape using a precision screen-printing or thin-film deposition process. Multiple printed sheets are then stacked, with each layer offset slightly so that alternating electrodes connect to opposite ends of the chip.

The stack is laminated under heat and pressure to bond the layers together, then carefully cut into individual chips of the 0201 size (0.6mm × 0.3mm). The green chips are then fired at high temperature (typically 1000°C to 1300°C in a reducing atmosphere for nickel electrodes) where the organic binders burn off and the ceramic particles sinter together, forming a dense, monolithic ceramic body with embedded conductive electrodes.

After firing, end terminations are applied. A conductive paste (typically copper-based) is applied to each end of the chip and fired to form the base termination that connects to the alternating internal electrodes. This is followed by electroplating a nickel barrier layer (to prevent solder leaching during PCB assembly) and an outer tin plating layer (to provide excellent solderability).

When voltage is applied across the capacitor, the barium titanate dielectric polarizes — the titanium ions within the perovskite crystal structure shift position, creating electric dipoles that align with the applied field. This ferroelectric polarization stores a large amount of charge per unit volume, giving X7R capacitors their high volumetric efficiency compared to Class 1 (C0G) dielectrics.

However, this ferroelectric nature also causes several characteristic behaviors: voltage dependence (capacitance decreases with increasing DC bias), temperature dependence (the ±15% X7R specification), and aging (capacitance decreases logarithmically over time as ferroelectric domains gradually relax). These effects are intrinsic to the material and must be considered in circuit design.

For the CC0201KRX7R6BB222, the 2.2nF at 10V rating in the tiny 0201 package is achieved by using many very thin dielectric layers — often 20, 30, or more layers — each only a few micrometers thick. The total capacitance is the capacitance of each layer multiplied by the number of active layers, allowing impressive capacitance values in extremely small packages.

Pin Description: CC0201KRX7R6BB222 Pin Definition and Functions
Terminal Type Description
Terminal 1 (End A) End Electrode First capacitor terminal — wraparound termination with Ni barrier and matte Sn plating, connects to odd-numbered internal electrodes
Terminal 2 (End B) End Electrode Second capacitor terminal — wraparound termination with Ni barrier and matte Sn plating, connects to even-numbered internal electrodes

Note: The CC0201KRX7R6BB222 is a non-polarized capacitor. Either terminal can be connected to either side of the circuit. The 0201 package is extremely small — 0.6mm × 0.3mm — requiring precision SMT placement equipment and careful solder paste application for reliable assembly.

Application Scenarios: In which products and applications is CC0201KRX7R6BB222 used
  • Smartphones and feature phones — IC decoupling and filtering
  • Wearable electronics — smartwatches, fitness trackers, hearables
  • IoT sensor nodes and miniature wireless devices
  • Digital IC power supply decoupling (VCC to GND)
  • High-density PCB designs with limited board space
  • Tablet computers and ultra-mobile PCs
  • Bluetooth modules and wireless accessories
  • Camera modules and image sensors
  • Medical wearables and implantable devices
  • Signal filtering in compact audio circuits
Alternative Models: What chips are recommended as replacements for CC0201KRX7R6BB222
Model Capacitance Voltage Dielectric Package
CC0201KRX7R6BB102 1nF 10V X7R 0201
CC0201KRX7R6BB472 4.7nF 10V X7R 0201
CC0201JRX7R6BB222 2.2nF 10V X7R 0201 (±5%)
CC0201KRX7R7BB222 2.2nF 16V X7R 0201
CC0402KRX7R6BB222 2.2nF 10V X7R 0402
GRM033R60J222KE18D 2.2nF 6.3V X5R 0201

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1