Opens in a new tab

Home » Passive Components, Resistors » RP0603BRD07330KL

RP0603BRD07330KL

Yageo RP series automotive ultra-high precision thin film resistor, 330kΩ ±0.1%, 0.1W, ±25ppm/°C TCR, AEC-Q200, anti-sulfur, -55°C to +155°C

7574

Effective Inventory

Image for reference only

Manufacturer Part:

RP0603BRD07330KL

Package:

0603 (1608 Metric)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The RP0603BRD07330KL is an automotive-grade ultra-high-precision thin film chip resistor from Yageo’s RP series, providing 330kΩ resistance with ±0.1% tight tolerance in a 0603 (1608 Metric) surface-mount package. Featuring an ultra-low ±25ppm/°C temperature coefficient, AEC-Q200 qualification, and anti-sulfur termination construction, this resistor delivers exceptional accuracy and long-term stability for precision automotive, medical, and industrial applications where minimal drift and maximum reliability are essential.

Key Specifications

Resistance 330kΩ
Tolerance ±0.1% (Ultra-high precision)
Power Rating 0.1W (1/10W) @ 70°C
Rated Voltage 75V
Overload Voltage 150V
Technology Thin Film (Sputtered)
Temperature Coefficient ±25ppm/°C (Ultra-low TCR)
Package / Case 0603 (1608 Metric)
Dimensions (L × W × H) 1.60mm × 0.80mm × 0.45mm
Operating Temperature -55°C to +155°C
Qualification AEC-Q200 (Automotive Grade)
Special Features Anti-Sulfur, Moisture Resistant
Moisture Sensitivity MSL 1 (Unlimited)
Termination Ni-barrier, Sn-plated (Matte Tin)
Packaging 7″ Reel, Paper Tape (5,000 pcs/reel)
Standards RoHS Compliant, Halogen Free, AEC-Q200

Features

  • Ultra-high precision: ±0.1% resistance tolerance — among the tightest available
  • Ultra-low temperature coefficient: ±25ppm/°C for extreme stability
  • Automotive grade — fully AEC-Q200 qualified
  • Anti-sulfur termination design — immune to sulfur contamination
  • Moisture resistant construction for humid environments
  • Advanced sputtering thin film technology
  • Low electrical noise for precision analog circuits
  • Wide operating temperature: -55°C to +155°C
  • MSL Level 1 — no preconditioning or dry bake required
  • RoHS compliant, halogen-free, lead-free

Applications

  • Automotive electronics — BMS, ADAS sensor interfaces
  • Precision voltage dividers and reference circuits
  • Medical devices and diagnostic instrumentation
  • Industrial measurement and process control
  • Instrumentation amplifiers and precision analog front-ends
  • Automotive engine control and transmission modules
  • High-accuracy sensing and bridge circuits
  • Energy metering and precision monitoring
  • Test and measurement calibration standards
  • Aerospace and defense electronics
Product Introduction: RP0603BRD07330KL Product Introduction

The RP0603BRD07330KL is a 330kΩ automotive-grade ultra-high-precision thin film chip resistor from Yageo’s RP series — the company’s flagship precision resistor line designed for applications demanding the highest levels of accuracy, stability, and reliability.

With an ultra-tight ±0.1% initial resistance tolerance and an exceptionally low ±25ppm/°C temperature coefficient, this resistor delivers precision performance that was once only achievable with through-hole precision resistors or much larger surface-mount packages. Over the full -55°C to +155°C operating range, the total resistance change due to temperature is only ±0.525% — and combined with the initial ±0.1% tolerance, the worst-case total deviation remains well under 1% across all conditions, making it ideal for precision sensing and measurement applications.

The RP series employs advanced sputtering thin film technology where a precision metallic alloy (typically nickel-chromium based) is deposited under vacuum conditions onto a high-purity alumina substrate. This process produces an extremely uniform, dense resistive film with outstanding long-term stability and low electrical noise — characteristics essential for precision analog circuits. High-precision laser trimming achieves the ±0.1% tolerance with exceptional accuracy.

A key differentiator of the RP series is its anti-sulfur termination design. Standard chip resistors with silver-based outer electrodes are susceptible to sulfur-induced corrosion in industrial, automotive under-hood, and high-pollution environments. Silver sulfide formation can cause significant resistance drift and eventual open-circuit failure. Yageo’s RP series eliminates silver from the termination path entirely, using a multi-layer electrode structure that is completely immune to sulfur contamination.

AEC-Q200 automotive qualification confirms that the RP0603BRD07330KL has passed rigorous reliability testing including temperature cycling, humidity bias, high-temperature storage, and sulfur resistance testing. Combined with moisture-resistant construction and MSL Level 1 classification, this resistor is engineered for reliable operation in the most demanding environmental conditions.

Supplied on 7-inch paper tape reels (code 07 = 7-inch reel) with 5,000 pieces per reel, the RP0603BRD07330KL is fully RoHS compliant, halogen-free, and ready for high-volume automated SMT assembly in automotive, medical, industrial, and aerospace electronics.

Working Principle: RP0603BRD07330KL Working Principle

An ultra-high-precision thin film resistor operates by controlling electrical current flow through a precisely engineered sputter-deposited metallic film, with manufacturing processes tightly controlled to achieve exceptional tolerance and temperature coefficient specifications.

In the RP0603BRD07330KL, fabrication begins with a high-purity 96% alumina (Al2O3) ceramic substrate, selected for its excellent thermal conductivity, electrical insulation properties, and dimensional stability. The substrate surface is polished to atomic smoothness — a critical requirement for depositing uniform thin films at the precision level needed for ±0.1% tolerance and ±25ppm/°C TCR.

The resistive thin film is deposited using DC magnetron sputtering. In this vacuum process, a target of the resistive alloy (a precisely formulated nickel-chromium-based alloy) is bombarded by high-energy ions, causing atoms to be ejected from the target surface and deposited onto the substrate. The resulting film is extremely thin — typically only a few hundred to a few thousand angstroms — but remarkably uniform in thickness, composition, and density. The sputtering process allows precise control over film properties by adjusting deposition parameters such as power, pressure, gas composition, and substrate temperature.

The ±25ppm/°C temperature coefficient is achieved through careful alloy formulation and deposition parameter optimization. In metallic thin films, the temperature coefficient of resistance arises from the temperature dependence of electron-phonon scattering — as temperature increases, increased lattice vibrations scatter conduction electrons more frequently, increasing resistance (positive TCR). By engineering the alloy composition and film microstructure, the TCR can be minimized and tightly controlled.

Following deposition, the resistor pattern is defined using photolithography: a photosensitive resist layer is applied, exposed through a precision photomask, and developed, then the unwanted resistive film is etched away. The result is a precisely defined resistor element with well-controlled geometry.

Laser trimming is then performed to achieve the ±0.1% tolerance. A focused, high-power laser beam precisely ablates (vaporizes) material from the resistor film — typically in an L-shaped cut pattern — carefully increasing the resistance until it reaches the target value. Real-time high-precision resistance measurement during trimming ensures accuracy within the tight ±0.1% specification.

A multilayer passivation system is applied to protect the resistor element. This typically includes a silicon nitride (SiN) layer deposited by PECVD, and may also include additional dielectric layers. The passivation is critical for maintaining the resistor’s precision specifications over its lifetime, as it prevents moisture ingress, contamination, and mechanical damage that could alter the resistive film’s properties.

The anti-sulfur termination is applied in multiple layers. Unlike conventional resistors that use silver-based outer electrodes, the RP series uses a silver-free electrode structure: a base adhesion layer (typically titanium-tungsten or chromium), a thick nickel barrier layer (preventing solder leaching), and an outer tin (Sn) plating for solderability. This structure is completely immune to sulfur-induced corrosion.

When current flows through this precision thin film resistor, the homogeneous metallic film provides a consistent, low-noise resistance path. The 0.1W power rating at 70°C means the resistor can continuously dissipate one-tenth of a watt, with power derating linearly to zero at the 155°C maximum operating temperature.

The AEC-Q200 qualification means this resistor has passed extensive automotive-grade reliability testing including 1000 temperature cycles, 1000 hours at 155°C, 1000 hours of humidity bias, and sulfur resistance testing — all confirming its suitability for the most demanding applications.

Pin Description: RP0603BRD07330KL Pin Definition and Functions
Terminal Type Description
Terminal 1 (End A) End Electrode First resistor terminal — anti-sulfur design with Ni barrier and matte Sn plating, no silver, AEC-Q200 qualified
Terminal 2 (End B) End Electrode Second resistor terminal — anti-sulfur design with Ni barrier and matte Sn plating, no silver, AEC-Q200 qualified

Note: The RP0603BRD07330KL is a non-polarized passive component. Either terminal may be connected to either side of the circuit. The ±0.1% ultra-precise tolerance and ±25ppm/°C ultra-low TCR make this resistor suitable for the most demanding precision applications.

Application Scenarios: In which products and applications is RP0603BRD07330KL used
  • Automotive Battery Management Systems (BMS) voltage sensing
  • ADAS sensor interfaces — camera, radar, LiDAR
  • Precision voltage dividers in reference circuits
  • Medical patient monitoring and diagnostic equipment
  • Industrial process control transmitters and instrumentation
  • Instrumentation amplifier gain networks
  • Wheatstone bridge and strain gauge conditioning
  • Precision ADC/DAC analog front-end circuits
  • Energy metering and smart grid equipment
  • Test and measurement calibration standards
Alternative Models: What chips are recommended as replacements for RP0603BRD07330KL
Model Resistance Tolerance TCR Package
RP0603BRD07100KL 100kΩ ±0.1% ±25ppm/°C 0603
RP0603BRD07220KL 220kΩ ±0.1% ±25ppm/°C 0603
RP0603BRD07470KL 470kΩ ±0.1% ±25ppm/°C 0603
RP0805BRD07330KL 330kΩ ±0.1% ±25ppm/°C 0805
RN73H2ATTD3303B25 330kΩ ±0.1% ±25ppm/°C 0603
ERA-6AEB3303V 330kΩ ±0.5% ±50ppm/°C 0603

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1