Opens in a new tab

Home » Capacitors, Passive Components » CC0603KRX7R9BB562

CC0603KRX7R9BB562

Yageo CC series X7R MLCC, 5.6nF ±10%, 50V DC, Class 2 general-purpose, 0603 package, -55°C to +125°C

4499

Effective Inventory

Image for reference only

Manufacturer Part:

CC0603KRX7R9BB562

Package:

0603 (1608 Metric)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CC0603KRX7R9BB562 is a general-purpose Class 2 multilayer ceramic capacitor (MLCC) from Yageo’s CC series, featuring 5.6nF capacitance with ±10% tolerance and X7R dielectric in a 0603 (1608 Metric) surface-mount package. With a 50V DC voltage rating and -55°C to +125°C operating temperature range, this capacitor is designed for general-purpose decoupling, filtering, and energy storage applications across consumer electronics, industrial equipment, telecommunications, and automotive systems. Some variants are AEC-Q200 qualified for automotive applications.

Key Specifications

Capacitance 5.6nF (5600pF, 562)
Tolerance ±10% (K)
Rated Voltage 50V DC
Dielectric X7R — EIA Class 2
Temperature Characteristic ±15% over -55°C to +125°C
Package / Case 0603 (1608 Metric)
Dimensions (L × W × T) 1.60mm × 0.80mm × 0.80mm
Operating Temperature -55°C to +125°C
Dissipation Factor ≤ 5% (120Hz, 25°C, Vrms=1V)
Insulation Resistance ≥ 100GΩ or 100s/MΩ (min)
Aging Rate ~1% per decade hour (X7R typical)
Moisture Sensitivity MSL 1 (Unlimited)
Termination Wraparound, Ni-barrier, Sn-plated
Packaging 7″ Reel, Paper Tape (4,000 pcs/reel)
Standards RoHS Compliant, Halogen Free, AEC-Q200 (auto grade variant)

Features

  • X7R Class 2 dielectric — high capacitance density
  • 5.6nF at 50V in compact 0603 package
  • ±10% tolerance for general-purpose applications
  • Wide operating temperature range: -55°C to +125°C
  • ±15% capacitance stability over temperature (X7R characteristic)
  • Nickel-barrier wraparound termination for reliable soldering
  • MSL Level 1 — no dry bake required
  • RoHS compliant and halogen-free
  • AEC-Q200 qualified automotive grade variants available
  • Cost-effective for high-volume production

Applications

  • Power supply decoupling and bypass capacitors
  • General purpose signal filtering
  • Consumer electronics — TVs, audio, home appliances
  • Industrial control and automation equipment
  • Automotive electronics (AEC-Q200 variant)
  • Telecommunications and networking devices
  • DC blocking and coupling in signal paths
  • LED driver circuits and lighting
  • Energy storage and transient suppression
  • DC-DC converter output filtering
Product Introduction: CC0603KRX7R9BB562 Product Introduction

The CC0603KRX7R9BB562 is a 5.6nF X7R dielectric multilayer ceramic capacitor from Yageo’s CC series, housed in the widely used 0603 (1608 Metric) surface-mount package. With a 50V DC voltage rating and ±10% capacitance tolerance, this capacitor is a versatile general-purpose component suitable for a broad range of decoupling, filtering, and energy storage applications across consumer, industrial, and automotive electronics.

The X7R dielectric — an EIA Class 2 material — provides an excellent balance of capacitance density and temperature stability. The “X7R” designation specifies: X = -55°C minimum operating temperature, 7 = +125°C maximum, and R = ±15% capacitance change over that temperature range (relative to 25°C). Compared to higher capacitance-density dielectrics like X5R or Y5V, X7R offers better stability, making it the preferred choice for applications operating across wider temperature ranges.

The part number follows Yageo’s CC series naming convention:
– CC = General purpose MLCC series
– 0603 = Package size (0.06″ × 0.03″ / 1.6mm × 0.8mm)
– K = ±10% tolerance
– R = Paper tape 7-inch reel packaging
– X7R = Dielectric material
– 9 = 50V rated voltage (code 9 = 50V)
– BB = Nickel barrier termination, base metal electrode
– 562 = 5.6nF capacitance (56 × 10² pF = 5600pF = 5.6nF)

X7R capacitors exhibit several characteristic behaviors that designers must account for: voltage dependence (capacitance decreases under DC bias — the 50V rating means the capacitor can withstand 50V, but actual capacitance at 50V may be significantly lower than the nominal value), temperature dependence (±15% over -55°C to +125°C), and aging (capacitance decreases logarithmically over time, typically ~1% per decade, recoverable by heating above Curie temperature).

The CC series features base metal electrode (BME) technology with nickel internal electrodes, providing cost-effective high-volume manufacturing while maintaining reliable performance. The wraparound nickel-barrier termination with tin plating ensures excellent solderability and compatibility with both leaded and lead-free assembly processes. Some X7R MLCC variants in this form factor carry AEC-Q200 automotive qualification.

Supplied on 7-inch paper tape reels with 4,000 pieces per reel and classified MSL Level 1, the CC0603KRX7R9BB562 is fully RoHS compliant and halogen-free, ready for high-volume automated SMT assembly in virtually any electronic product category.

Working Principle: CC0603KRX7R9BB562 Working Principle

An X7R multilayer ceramic capacitor stores electrical energy through the polarization of a ferroelectric ceramic dielectric between interleaved conductive electrodes. The X7R designation defines its temperature performance envelope: rated from -55°C to +125°C with no more than ±15% capacitance change over that range.

In the CC0603KRX7R9BB562, the capacitor body consists of many thin layers of X7R ceramic dielectric alternating with internal metal electrodes. X7R is a Class 2 dielectric based on barium titanate (BaTiO3) — a ferroelectric material that exhibits the perovskite crystal structure — with carefully controlled dopants and additives that modify the dielectric properties. The formulation is engineered so that the Curie temperature (the temperature at which capacitance peaks) and the temperature coefficient of capacitance fall within the ±15% X7R specification band.

The manufacturing process begins with the preparation of ceramic slurry — a mixture of barium titanate powder, dopant oxides, organic binders, plasticizers, and solvents. This slurry is cast into thin, flexible green ceramic sheets (tape) using a doctor blade process. The thickness of these sheets determines the dielectric layer thickness, which in turn determines the voltage rating and capacitance per layer.

Internal electrode paste (typically nickel for base metal electrode technology, or silver-palladium for precious metal electrode types) is printed onto the green ceramic tape using a precision screen-printing process. The printed pattern covers most of the sheet but leaves a margin on one side so that the electrode connects to only one end of the finished chip.

Multiple printed sheets are then stacked, with each layer offset so that alternating electrodes extend to opposite ends of the chip. The number of layers directly determines the total capacitance — each layer acts as an individual capacitor, and all layers are connected in parallel (capacitors in parallel add their capacitance). For a 5.6nF 0603 50V X7R capacitor, there may be dozens of active layers, each only a few micrometers thick.

The stacked green sheets are laminated under heat and pressure to bond them into a solid monolithic block, then precisely cut into individual 0603-sized chips using a dicing saw or laser.

The green chips undergo binder burn-out and then co-firing at high temperature (typically 1000°C to 1300°C in a controlled reducing atmosphere for nickel electrodes). During firing, the organic materials vaporize, and the ceramic particles sinter together, densifying into a solid monolithic ceramic body with the embedded electrode layers. The firing atmosphere must be carefully controlled to prevent oxidation of the nickel electrodes while allowing proper sintering of the ceramic.

After firing, end terminations are applied. A conductive termination paste is applied to each end of the chip and fired to form a continuous electrical connection with all the alternating internal electrodes at that end. Nickel is then electroplated as a barrier layer to prevent solder leaching during assembly, followed by tin plating to provide excellent solderability.

When a voltage is applied, the barium titanate dielectric polarizes — the titanium ions within each unit cell shift within the perovskite crystal structure, creating electric dipoles that align with the applied field. This ferroelectric polarization stores significantly more charge per unit volume than the simple ionic polarization found in C0G (Class 1) dielectrics, giving X7R capacitors much higher volumetric efficiency.

However, the ferroelectric nature also causes: (1) DC bias dependence — as DC voltage increases, capacitance decreases because domains become saturated and can’t polarize further; (2) AC voltage dependence — capacitance varies with AC signal amplitude; (3) temperature dependence — the ±15% X7R variation; and (4) aging — capacitance decreases logarithmically over time as domains gradually relax. These are all intrinsic, predictable characteristics that experienced design engineers account for in their circuit designs.

The 50V rating of the CC0603KRX7R9BB562 represents the maximum DC voltage that can be continuously applied at temperatures up to 85°C (with derating at higher temperatures). The 4,000-piece reel packaging and MSL 1 classification make it convenient and cost-effective for high-volume SMT production.

Pin Description: CC0603KRX7R9BB562 Pin Definition and Functions
Terminal Type Description
Terminal 1 (End A) End Electrode First capacitor terminal — wraparound termination with Ni barrier and matte Sn plating, connects to odd-numbered internal electrodes
Terminal 2 (End B) End Electrode Second capacitor terminal — wraparound termination with Ni barrier and matte Sn plating, connects to even-numbered internal electrodes

Note: The CC0603KRX7R9BB562 is a non-polarized capacitor. Either terminal can be connected to either side of the circuit. X7R MLCCs exhibit DC bias voltage dependence — actual capacitance decreases with increasing applied DC voltage. Designers should account for this derating effect.

Application Scenarios: In which products and applications is CC0603KRX7R9BB562 used
  • Power supply decoupling and IC bypass capacitors
  • General purpose signal filtering — low-pass and high-pass filters
  • DC blocking in audio and signal circuits
  • Consumer electronics — televisions, set-top boxes, audio systems
  • Industrial control equipment and PLCs
  • Automotive electronics (AEC-Q200 qualified variants)
  • Telecommunications and networking hardware
  • DC-DC converter input/output filtering
  • LED lighting and driver circuits
  • Energy storage for transient suppression
Alternative Models: What chips are recommended as replacements for CC0603KRX7R9BB562
Model Capacitance Voltage Dielectric Package
CC0603KRX7R9BB472 4.7nF 50V X7R 0603
CC0603KRX7R9BB682 6.8nF 50V X7R 0603
CC0603JRX7R9BB562 5.6nF 50V X7R 0603 (±5%)
CC0603KRX7R9BB103 10nF 50V X7R 0603
GRM188R71H562KA01D 5.6nF 50V X7R 0603
CC0805KRX7R9BB562 5.6nF 50V X7R 0805

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1